Текст страницы
Cordless Impact Driver
from the tool before transporting.
Dispose of waste
Damaged power tools, batteries, ac-
cessories and waste packaging mate-
rials must be recycled and reused in
an environmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The first 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu-
ment that confirms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certificates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
full model name of the purchased P.I.T. prod-
uct, the serial number on the nameplate of the
fuselage, and the date of purchase, and the
required warranty. The whole machine and its
accessories.
The warranty period:
1. The warranty period of the product is 12
months from the date of sale. During the
warranty period, the service department
will eliminate manufacturing defects free of
charge and replace the parts that fail due to
the manufacturer’s fault. In warranty repair, an
equivalent operable product is not provided.
Replaceable parts become the property of the
service provider.
2. The wear degree on the diameter of the
motor rotor commutator is less than 0.4 mm
(except for brushless motor tools), and the
internal damage caused by the quality of the
tool belongs to the warranty.
The following situations occur during the
warranty period, which is not covered by the
warranty:
1. In the absence of any valid legal docu -
than for a hard seat. Also, a clearly longer im-
pact duration is required
Tips
Before screwing larger, longer screws into
hard materials, it is advisable to pre-drill a pi-
lot hole with the core diameter of the thread to
approx. 2/3 of the screw length.
Note: Ensure that no metal particles enter the
power tool.
After working at a low speed for an extended
period, you should operate the power tool at
the maximum speed for approximately three
minutes without load to cool it down.
Recommendations for optimal handling of
the battery
A significantly reduced operating time after
charging indicates that the battery has deteri-
orated and must be replaced.
Follow the instructions on correct disposal.
Maintenance and service
Maintenance and cleaning
►Remove the battery from the power tool
before carrying out work on the power
tool (e.g. maintenance,changing tool,
etc.). The battery should also be re -
moved for transport and storage. There
is risk of injury from unintentionally press-
ing the on/off switch
►To ensure safe and ecient operation,
always keep the power tool and the
ventilation slots clean.
►Clean the tool holder(1) and locking
sleeve (2) from time to time and grease
them lightly with 1 600 A00 2NE grease.
When the battery is no longer operative,
please refer to an authorized after-sales ser-
vice agent for P.I.T. power tools.
Service
►Have your power tool repaired only by
qualified personnel using original spare
parts. This ensures the safety of the power
tool.
A list of authorized service centers can be
found on the official website of P.I.T. link:
https://pittools.ru/services/
Storage and transportation
Store the tool in closed rooms with natural
ventilation in the package at air temperature
from 10°С to +50°С and air humidity not more
than 80%.
Products can be transported by any type of
closed transport in the manufacturer’s pack-
aging or without it, while preserving the prod-
uct from mechanical damage, precipitation.
Remove the battery and replacement tool
8