Текст страницы
Installing or removing the brush and
wiper nozzle
Optional accessory for UB100D / UB101D
17. Unless the tool supports the use near
high-voltage electrical power lines, do not use
the battery cartridge near high-voltage electri-
cal power lines. It may result in a malfunction or
breakdown of the tool or battery cartridge.
18. Keep the battery away from children.
SAVE THESE INSTRUCTIONS.
Attach the brush nozzle or wiper nozzle to the flexible
hose, and then install the flexible horse to the main unit.
► Fig.3: 1. Brush nozzle 2. Wiper nozzle 3. Flexible
hose
To remove the brush nozzle or wiper nozzle, perform
the installation procedure in reverse.
CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
charger.
Installing or removing the long
nozzle
Optional accessory for UB100D / UB101D
Install the long nozzle in the same way as the nozzle. To
remove the long nozzle, perform the installation proce-
dure in reverse.
Installing or removing the tapered
nozzle
Optional accessory for UB100D / UB101D
Attach the tapered nozzle to the nozzle, and then install
the nozzle to the main unit. To remove the tapered noz-
zle, perform the installation procedure in reverse.
Assembly for vacuuming
Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3.
Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4.
When not using the battery cartridge, remove
it from the tool or the charger.
Installing or removing the nozzle
Optional accessory for UB101D
ASSEMBLY
Align the protrusions on the nozzle with the grooves on
the main unit, then insert the nozzle into the main unit,
and then turn it to lock it into place.
► Fig.4: 1. Nozzle
CAUTION: Always be sure that the machine is
switched off and the battery cartridge is removed
before carrying out any work on the machine.
To remove the nozzle, perform the installation proce-
dure in reverse.
Assembly for blowing
Installing or removing the dust bag
Optional accessory for UB100D / UB101D
Installing or removing the nozzle
Optional accessory for UB101D
Align the protrusions on the joint of dust bag with the
grooves on the main unit, then insert the joint into the
main unit, and then turn it to lock it into place.
► Fig.5: 1. Joint 2. Dust bag
Align the protrusions on the nozzle with the grooves on
the main unit, then insert the nozzle into the main unit,
and then turn it to lock it into place.
► Fig.1: 1. Nozzle
To remove the dust bag, perform the installation proce-
dure in reverse.
To remove the nozzle, perform the installation proce-
dure in reverse.
Installing or removing the flexible
hose set
Optional accessory for UB100D / UB101D
Installing or removing the garden
nozzle
Optional accessory for UB100D
Attach the joint, flexible hose, pipe, and sash nozzle to
the main unit in order.
► Fig.6: 1. Joint 2. Flexible hose 3. Pipe 4. Sash
nozzle
Align the protrusions on the garden nozzle with the
grooves on the main unit, then insert the garden nozzle
into the main unit, and then turn it to lock it into place.
► Fig.2: 1. Garden nozzle
To remove the flexible hose set, perform the installation
procedure in reverse.
To remove the garden nozzle, perform the installation
procedure in reverse.
9
ENGLISH