Текст страницы
• Do not cover the body or top of freezer with lace. This affects the
performance of your freezer.
• Secure any accessories in the freezerduring transportation to prevent
damage to the accessories.
Installing and operating your freezer
Before starting to use your freezer, you should pay attention to the following points:
• The operating voltage for your freezer is 220-240 V at 50Hz.
• The plug must be accessible after installation.
• The appliance must be connected with a properly installed fused socket. Power
supply (AC) and voltage at the operating point must match with the details on the
name plate of the appliance (name plate is located on the inside left of the
appliance).
• Before connecting your freezer, ensure that the information on the data plate
(voltage and connected load) matches that of the mains electricity supply. If in
doubt, consult a qualified electrician.
• Insert the plug into a socket with an efficient ground connection. If the socket has
no ground contact or the plug does not match, we recommend that you consult a
qualified electrician for assistance.
• We do not accept responsibility for any damages that occur due to ungrounded
usage.
• Place your freezer where it will not be exposed to direct sunlight.
• Your freezer should never be used outdoors or exposed to rain.
• Your appliance should be at least 50 cm away from stoves, gas ovens and heater
cores, and at least 5 cm away from electrical ovens.
• When your freezer is placed next to a deep freezer, there should be
at least 2 cm between them to prevent humidity forming on the outer
surface.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly, especially the interior, before use
(see Cleaning and Maintenance).
• The installation procedure into the kitchen unit is given in the installation manual.
This product is intended to be used in proper kitchen units only.
• Before using your fridge, wipe all parts with a solution of warm water and a
teaspoon of sodium bicarbonate, then rinse with clean water and dry.
Place all parts in the fridge after cleaning.
EN - 17 -