Текст страницы
5 Setting up the device
508
570
530
386
B
A
Th൴s area shows the d൴mens൴ons of furn൴ture cutt൴ng.
Bu alan mob൴lya kes൴m ölçüler൴n൴ göstermekted൴r.
310
298
274
440
MOUNTING TEMPLATE SCALE 1:1
MONTAJ ŞABLONU SKALA 1:1
A,B,C,D = Ø3
C
D
650 mm
650 mm
ELEKTRİKLİ GAZLI
ELECTRO GAS
WORKTOP
TEZGAH
H670.1170.0 5.01
Figure 1
5.4 Drilling mounting holes
• Adhere the installation template provi
ded with the appliance onto the surface
on which the installation will be carried
out.
• Drill the holes indicated on the installa
Figure 3
1. Flap Pin Socket
2. Flap Pin
Insert the plastic pin (Figure 3/area no. 2)
on the pin socket on the motor exhaust
(Figure 3/area no.1). Then bend the flap
lightly to insert the other pin on the flap
and insert the other pin to its socket
(Figure 3).
tion draft with A, B, C, D using a Ø4 mm
drill bit. (Figure 1)
1
2
Figure 2
• Cut the lower surface of the cabinet
where the hood will be installed in the
dimensions specified in the technical
drawing (Figure 2).
Figure 4
1. Air discharge pipe
2. Air exhaust flue of the hood
If you are to use the Ø 120/150 mm
plastic flue adapter, attach one end of
the pipe to this adapter; if not, attach the
air discharge pipe of the product to the
Cooker Hood / User Manual
15 / EN