Текст страницы
5 Installation of appliance
1. Hood
2. User manual
A
3. Screws x6
4. Plastic dowel x6
5.3 Installation
WARNING: Before starting the instal
lation, read the safety information
on User Manual.
B
Two methods for installation
WARNING: Failure to install with
screws and stabilizers in accord
ance with these instructions may
result in electric shock.
Method A:
For the installation of the hood, please contact the
nearest Authorized Service.
To install onto the wall drill 2 holes of Ø8mm on a
suitable place according with the centre distance
of hole in the back of the cooker hood.
It is the customer’s responsibility to prepare the
location and electrical installation of the hood.
Insert the nut into the holes.
5.1 Position of the appliance
Insert the screws into the nuts and tight.
Put the cooker hood onto the tighten screws.
Fix the cooker hood with safety screw.
The two safety vents are positioned on the back
casing, with diameter of 6mm.
Put the one way valve onto the cooker hood.
Min.
650 mm
• Distance between the cooker and the cooker hood
must be considered prior to assembly. This distance
should be 65 cm.
• Distance must be measured from the surface of
grate for gas cookers, from surface of glass for
electric cookers.
Method B:
5.2 Installation accessories
Drill 4 holes of 6mm diameter at the bottom of the
hanging cupboard .Put the one way valve on the
cooker hood, then install the cooker hood on the
bottom of the hanging cupboard, tighten the hood
with enclosed 4 screws.
Hood
User manual
01M-9201773200-1221-01
1
2
3
4
13 / EN
Hood / User Manual