Текст страницы
Hardware Explanations
I/O Ports Overview
LED Lights Overview
POWER
5GHz
1G WAN/LAN1 port
DCIN port
LAN
1G WAN/LAN1
6GHz
2.4GHz
2.5G WAN/LAN1
LAN ports 2-4
2.5G WAN/LAN1 port
USB 3.2 Gen 1 port
Quick Start Guide
Specifications:
DC Power adapter
DC Output: +12V with 3.0A current
RT-AXE7800 Wireless-AXE7800 Tri-band Gigabit Router
Operating Temperature
0~40oC
Storage
0~70oC
Operating Humidity
50~90%
Storage
20~90%
Router Setup Steps
Prepare your Modem 01
1 Unplug the power of cable / DSL modem. If it
2 Connect your modem to WAN port at the back side of the router with the
4 Check the modem LED lights to ensure the connection is active.
has a battery backup, remove the battery.
network cable provided. The WAN port is set as 2.5G by default.
3 Power on the modem. Plug modem to the power
outlet and power on.
Unplug
If you are using DSL for internet,
Modem back
you will need your username
/ password from your Internet
service provider (ISP) to properly
configure your router.
Modem front
Modem back
Install your Router 02
1 Plug the adapter into the DCIN port, and press the Power switch.
2 The power LED will light up when the hardware is ready.
– Via app
3 [App] On your iOS or Android mobile device, go
4 [App] On your iOS or Android mobile device, tap Settings > Wi-Fi, connect
5 [App] Launch ASUS Router App and follow the
instructions to complete the setup.
to the app store, search for ASUS Router, and
download the app.
to the default network SSID shown on the product label on the back side of
the router. Or scan the QR code on the product label to connect the default
network SSID.
_
* XX refers to the last two digits
of MAC address. You can find it
on the label on the back of your
router.
– Or via web browser
4 [Wired / Wireless] Open a web browser.
3 [Wired] Connect your PC to LAN port at the
[Wireless] Connect to the network with default
SSID shown on the product label on the back side
of your router “ASUS_XX”.
back side of the router using an additional
network cable.
You will be redirected to the ASUS Setup Wizard. If not, navigate to
http://www.asusrouter.com.
* Please connect your PC to either LAN2, LAN3 or LAN 4
port.
Follow the instructions to complete
the setup.
http://www.asusrouter.com/
1G Port WAN Type Setup Steps
Prepare your Router 01
Login and Connect – Setting to 1G WAN under factory default settings 02
1 [ASUS Setup Wizard] Select “manual setting”.
2 [ASUS Setup Wizard] Select “1G Ethernet”, then follow the instructions to
Connect the modem to the WAN port (1G WAN/LAN1) with a
network cable.
complete the setup of SSID and login information.