Текст страницы
Scenario 1: Set Up the Device as a Router
I. Connect the Router
II. Connect the Router to the Internet
WiFi Settings
Internet connection type: DHCP
The product appearance may vary with models. Please refer to the product you purchased.
1. Connect your wireless client such as a smartphone to the Wi-Fi network of the router. For
the default Wi-Fi name (SSID), check the label on the device body. It is no Wi-Fi password
by default.
*WiFi Name @Tenda_XXXXXX
*WiFi
Power source
➊
Password
8 – 32 characters
Not encrypted
Tips
i
Set WiFi password to router login
password
Internet
- If Unsecured Network prompts on the page, ignore it.
- For network security, the Wi-Fi password will be set in later setup.
Previous
Next
Quick Installation Guide
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052 www.tendacn.com Made in China
AX3000双频千兆Wi-Fi 6路由器
型号: AX12 Pro v2
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052 www.tendacn.com Made in China
地址: http://tendawifi.com
AX3000双频千兆Wi-Fi 6路由器
• If the router detects that your connection type is PPPoE. Set the Wi-Fi name, Wi-Fi
password and login password. Tap Next.
输入: 12V 1A
型号: AX12 Pro v2
Modem
地址: http://tendawifi.com
输入: 12V 1A
Wi-Fi 7 Router
RE6L Pro/TE6L Pro/RE3L/TE3L
请勿擅自拆机, 否则不予保修；
请勿擅自拆机, 否则不予保修；
请使用配套电源, 以免损坏产品
请使用配套电源, 以免损坏产品
SSID
XXXXXX_XXXXXX
XXXXXXXX
− If the PPPoE user name and password are required for internet access, select the ISP
Type based on your region and ISP and enter required parameters (if any).
MESH/RST 1/2.5GE
2
3
4
POWER
XXXXXXXX
LAN
− If you forgot the PPPoE user name and password, you can obtain the PPPoE user name
and password from your ISP and manually enter them.
2. The page will automatically redirect to the web UI of the router. If not, disable your mobile
data traffic, start a browser and visit tendawifi.com in the address bar.
Ethernet cable
➋
Or
WiFi Settings
Internet Settings
Any Ethernet ports. 2.5GE port is recommended (if any)
tendawifi.com
Detection succeeded. Recommended internet
connection type: PPPoE
*WiFi Name @Tenda_XXXXXX
ISP Type Normal
*WiFi
3. Perform operations as prompted.
Ethernet jack
Example: RE6L Pro
Password
Dynamic IP
Internet
Connection
Type
Not encrypted
Tap Start.
➊
Scan the QR code or visit www.tendacn.com for
installation videos, technical specifications, user
guides and more information.
Tips
Enter the username
i
Welcome to use Tenda router
* PPPoE
Username
Set WiFi password to router login
password
Faster, Safer, Smoother, Smarter
Enter the password
* PPPoE
Password
Start
You can see the product name and model on the
product label.
The label can be found on the back of the device.
Get Support
and Services
Previous
Next
Previous
Next
• If you use the modem for internet access, power off the modem first before connecting the WAN port of the router to
the LAN port of your modem and power it on after the connection.
• Refer to the following relocation tips to locate the router to a proper position:
- Place the router in a high position with few obstacles.
- Keep your router away from electronics with strong interference, such as microwave ovens, induction cookers, and
refrigerators.
- Keep your router away from metal barriers, such as weak current boxes, and metal frames.
➋
Power on the router.
Tips
• Wireless router x 1 • Power adapter x 1 • Ethernet cable x 1 • Quick installation guide
Package Contents
➊
➋
The Wi-Fi password is used to connect to the Wi-Fi network, while the login password is used to log in to the web UI of
the router.
RE6L Pro is used for illustrations here unless otherwise specified. The actual product prevails.
Connect the WAN port of the router to the LAN port of your modem or the Ethernet
jack using an Ethernet cable.
• If the router detects that your connection type is DHCP. Your internet access is available
without further configuration (for example, PPPoE connection through an optical
modem is completed).
Set Wi-Fi name, Wi-Fi password and login password. Tap Next.
Scenario 2: Set Up as an Add-on Node Internet Connection with NFC
Tips
Done. When the indicator is solid green, the network connection is successful.
II. Relocate the Router
The router has NFC stickers, you can connect your NFC-enabled devices to the router's
Wi-Fi with one-touch. Only NFC-enabled Android or HarmonyOS phones or tablets can
connect to the internet with one-touch.
This router supports IPv6, and the IPv6 is enabled by default. If your broadband service
supports IPv6, you can access the IPv6 network after setup.
• This router can be networked with Tenda WiFi+ routers.
• Ensure that the existing router (primary node) has been connected to the internet and the router (secondary node) to
be added has never been used. If not, reset this router first.
• Two RE6L Pro are taken an example here. If the router fails to be added to an existing network, contact Tenda
customer service for help.
1. Write Wi-Fi information to NFC stickers.
(1) Install and register Tenda WiFi App by scanning the QR code. After managing the
router (connect to the router's Wi-Fi, the App will automatically discover the router),
enter the router configuration page and navigate to the NFC Sticker.
Configuration completes
I. Add the Router to an Existing Network
Complete
1. Refer to the following relocation tips to locate the router to a proper position:
• Ensure that the distance between any two nodes is less than 10 meters.
• Keep your routers away from electronics with strong interference, such as microwave
ovens, induction cookers, and refrigerators.
• Place the routers in a high position with few obstacles.
2. Power on the router again.
3. Wait for 1-2 minutes and observe the router’s indicator. If the indicator is solid green, the
connection between the primary node and secondary node is good. Otherwise, move the
router (secondary node) closer to the existing router for better connection quality.
1. Place the router in an elevated and open position within 3 meters from your existing
router.
2. Use the power adapter to connect the router to a power source.
3. Press the networking button of the router for about 1-3 seconds. The indicator blinks
green quickly. Within 2 minutes, press the networking button of the existing router for 1-3
seconds to negotiate with this router. The indicator blinks green quickly.
Scan to download Tenda WiFi App
Done.
To access the internet with:
• Wi-Fi-enabled devices: Connect to the router’s new Wi-Fi network (see the configuration
completion page for tips). You can connect to any Wi-Fi to access the internet, and 5G
Wi-Fi is recommended.
To access the internet with:
Internet
*As required by related laws and regulations, the device is performing Dynamic Frequency Selection (DFS).
Please connect to the Wi-Fi after about 90 seconds.
− Wi-Fi-enabled devices: Connect to your Wi-Fi network. (The Wi-Fi name and Wi-Fi
password of the new router are the same as the existing router.)
*Clients need to support 802.11be to experience the high speeds offered by Wi-Fi 7 routers.
* Clients need to support 802.11be to experience the high speeds offered by Wi-Fi 7 routers.
(2) Select the Wi-Fi name you want to write into sticker, and tap Write NFC Sticker.
(3) Place the NFC sticker near the NFC area of the phone (usually around the camera on
the back of the phone).
Wait for a moment, the Wi-Fi information is successfully written into the NFC sticker.
Place the NFC sticker in a visible location at home for internet access.
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052 www.tendacn.com Made in China
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, No.1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052 www.tendacn.com Made in China
• Wired devices: Connect to an Ethernet port of the router using an Ethernet cable.
AX3000双频千兆Wi-Fi 6路由器
AX3000双频千兆Wi-Fi 6路由器
型号: AX12 Pro v2
型号: AX12 Pro v2
− Wired devices: Connect to an Ethernet port of any router using an Ethernet cable.
地址: http://tendawifi.com
地址: http://tendawifi.com
输入: 12V 1A
输入: 12V 1A
MESH/RST
MESH/RST
*NFC stickers can be re-written if the Wi-Fi name or Wi-Fi password changes.
请勿擅自拆机, 否则不予保修；
请勿擅自拆机, 否则不予保修；
请使用配套电源, 以免损坏产品
请使用配套电源, 以免损坏产品
Within 2 minutes
XXXXXXXX
XXXXXXXX
MESH/RST 1/2.5GE
2
3
4
POWER
MESH/RST 1/2.5GE
2
3
4
POWER
2. Connect your phone to the internet.
* Ensure that the NFC function is enabled, and the screen is unlocked and active.
This router
Existing router
Example: RE6L Pro
Place the NFC sticker near the NFC area of the phone, wait for a moment, and remove the
phone when the phone prompts for sound or vibration. When the phone prompts
Connect to network, tap CONNECT to connect to Wi-Fi without encryption.
NFC Service Just now
When the indicator of the router lights solid green, the networking is successful and the
router becomes a secondary node in the network.
Connect to network
Connect to @Tenda_XXXXXX?
CANCEL CONNECT