Текст страницы
1. Deactivate the Absolute Persistence Module.
2. Remove the NVMe password if your have set one.
Step 4.
For computer models with RAID settings, a window is displayed to remind you of data damage.
Select Yes to proceed.
Step 5.
A window is displayed to confirm all UEFI BIOS settings will be reset. Select Yes to proceed.
Note: If the Intel AMT control and Absolute Persistence(R) Module are permanently disabled,
these settings cannot be reset successfully.
Step 6.
Enter the supervisor password, system management password or power-on password in the
window prompted.
Your computer will restart immediately. It takes a few minutes to complete the initialization process. Your
computer screen might be blank during this process. This is normal and you should not interrupt it.
Update the UEFI BIOS
When you install a new program, device driver, or hardware component, you might need to update the UEFI
BIOS.
Download and install the latest UEFI BIOS update package by one of the following methods:
From the Vantage app
Follow the instructions to update the UEFI BIOS from the Vantage app.
Step 1.
Open the Vantage app, and then click Device ➙ System Update.
Step 2.
If the latest UEFI BIOS update package is available, follow the on-screen instructions to download
and install the package.
From the Lenovo Support Web site
Follow the instructions to update the UEFI BIOS from the Lenovo Support Web site.
Step 1.
Go to https://pcsupport.lenovo.com and select the entry for your computer.
Step 2.
Click Drivers & Software ➙ Manual Update ➙ BIOS/UEFI.
Step 3.
Follow the on-screen instructions to download and install the latest UEFI BIOS update package.
From the Windows Update
Follow the instructions to update the UEFI BIOS from the Windows Update.
Step 1.
Type Settings in the Windows search box and press Enter.
Step 2.
Click Windows Update ➙ Check for updates.
Step 3.
If a BIOS update package appears in your update list, click Download or Install to initiate the
update.
24
Linux User Guide