Инструкция 15.6" Ноутбук Samsung Galaxy Book 4 NP754

Settings & Upgrade

Setting passwords

You can set passwords following these instructions on the BIOS setup screen.

• Supervisor Password (low security level): This password is required when turning on

the computer or entering the BIOS setup.

• User Password (low security level): This password is required to enter the BIOS

setup. This password will be deactivated automatically if the Supervisor Password is disabled.

• HDD Password (high security level): This password is required to access the hard

disk drive (HDD) from another computer. This password may not be supported, depending on the model or storage device.

Setting a boot password

1 Turn on the computer.

2 Before the Samsung logo appears, press the F2 key several times.

3 Access the Security menu on the BIOS setup screen.

4 Select a password type (Set Supervisor Password, Set User Password, or Set HDD

Password).

‌If you cannot select an item or the HDD Password Frozen message appears, turn off
the computer and turn it on again. Then, press the F2 key several times before the
Samsung logo appears to enter the BIOS setup screen.

5 Enter a password and select OK.

‌The password should be 8-20 characters and contain both uppercase and lowercase letters and numbers.

6 Select Save → OK to save and restart.

• To enable the Password On Boot option, set a Supervisor Password and enter

the password when starting up the computer.

• For some models, if the password entered message appears in the Setup Notice

window, select OK to complete the setup.

47