Текст страницы
Cordless Hammer Drill
material handled only by specialists.
–
If possible, use a dust extractor suitable for
the material.
–
Ventilate the work area well.
–
It is recommended to use a respiratory
mask with a class P2 filter. Observe the
regulations valid in your country for the
materials to be processed.
►Avoid dust accumulation in the workplace.
Dust can be easily ignited.
►To save energy, switch on the power tool
only when you intend to use it.
Product Description and Specifi-
cations
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious injury.
Intended Use
The machine is intended for hammer drilling
in concrete,brick and stone. It is also suitable
for drilling without impact in wood, metal, ce-
ramic and plastic. Machines with electronic
control and right/left rotation are also suitable
for screwdriving.
Product Features
The numbering of the product features refers
to the illustration of the machine on the graph-
ics page.
(1) SDS-plus quick change chuck
(2) LED workinglight
(3) Designation of operating modes
(4) Selector switch for drilling/hammer drilling
(5) Rotational direction switch
(6) On/Off switch
(7) Handle (insulated gripping surface)
(8) Rechargeable battery
(9) Battery release button
Technical Parameters
Model
PBH20H-22B
Rated voltage
DC 20V
No-load speed
0-1350 r/min
Impact frequency
0-4700 ipm
Max. drilling diameter
(concrete)
Ø22 mm
Impact
1.8 J
Weight
2.3 kg
Compatible battery
(availability varies by
package)
PH20-3.0 (3 Аh)
PH20-4.0 (4 Аh)
PH20-5.0 (5 Аh)
PH20-6.0 (6 Аh)
the gas pipeline can lead to an explosion.
Damage to the water supply leads to
material damage.
►When jamming the working tool, turn off
the power tool. Eliminate the cause of
jamming of the working tool.
►Before switching on the power tool, make
sure that the tool can turn freely. When
turning on a power tool with a jammed
working tool, large reaction moments
occur.
►For impact-free drilling in wood, metal,
ceramics and plastics, as well as for
screwdriving, use tools without SDS-plus
(eg drills with cylindrical shank). These
tools require a keyless, chuck or gear
chuck.
►If the dust cap is damaged, it must be
replaced immediately. The dust cap
prevents drilling dust from entering the
chuck. When installing the operating tool,
be careful not to damage the dust cap.
►Always hold the power tool during
operation with both hands, having
previously taken a stable position. With
two hands you work more reliably with the
power tool.
►Fix the workpiece. A workpiece placed in
a jig or vise is held more securely than in
your hand.
►Wait until the power tool has come to a
complete stop before releasing it from your
hands. The work tool may jam and this
may result in loss of control of the power
tool.
►When transporting and storing the tool,
set the rotation direction switch to the
middle position. If the switch is actuated
unintentionally, there is a risk of injury.
►When turning on a power tool with a
jammed working tool, high reaction
moments occur.
►Prevent unintentional activation. Make
sure the switch is in the off position before
installing the battery. Carrying the power
tool with your finger on the switch, or
inserting the battery into the power tool
while it is on, may cause accidents.
►Installing the SDS-plus working tool:
Check the fixation by trying to pull out the
working tool.
►Dust from materials such as lead-based
paint, certain types of wood, minerals and
metals can harm your health and cause
allergic reactions, respiratory problems
and/or cancer. Have asbestos-containing
9