Текст страницы
Cordless Hammer Drill
PH20-2.4A
PH20-3.0A
Compatible charger
(availability varies by
package)
Contents of delivery
Cordless Hammer Drill 1pc
Cement drill
3pcs
Auxiliary handle
1pc
Guide ruler
1pc
Instruction manual
1pc
Model
Recharge-
able Battery
Battery
Charger
PBH20H-22B
/
/
PBH20H-22B/1
PH20-4.0×1
PH20-2.4A×1
PBH20H-22B/2
PH20-4.0×2
PH20-2.4A×1
After each use, clean the tool, the chuck and
the ventilation slots of the power tool, as well
as the ventilation slots of the battery.
►Replace a damaged protective cap
immediately. It is recommended that this
be done by a service shop. If the cord
needs to be changed, contact P.I.T or an
authorized P.I.T.
Service
► Have your power tool repaired only by
qualified personnel using original spare parts.
This ensures the safety of the power tool.
Storage and transportation
Store the tool in closed rooms with natural
ventilation in the package at air temperature
from -10°С to +50°С and air humidity not
more than 80%.
Products can be transported by any type
of closed transport in the manufacturer’s
packaging or without it, while preserving
the product from mechanical damage,
precipitation. Remove the battery and
replacement tool from the tool before
transporting.
Dispose of waste
Damaged power tools, batteries, ac-
cessories and waste packaging materi-
als must be recycled and reused in an
environmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The first 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu-
ment that confirms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certificates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
Note
Technical errors and typographical errors
may be made in the text and numerical
designations of the instructions.
Since the product is constantly being
improved, P.I.T. reserves the right to make
changes to the specifications and product
specifications specified here without prior
notice.
Mounting and Operation
The following table indicates the action objec-
tives for mounting and operation of the power
tool. The instructions for each action objective
are shown aside. Depending on the type of
application, various instruction combinations
are required. Observe the safety instructions.
►Changing the position of the auxiliary
handle (Fig 1)
►Removing the battery (Fig 2)
►Inserting the battery (Fig 3)
►Changing the position of the auxiliary
handle (Fig 4)
►Inserting SDS-plus Drilling Tools (Fig 5)
►Removing SDS-plus Drilling Tools (Fig
6)
►Selecting the operating mode and rota-
tion direction (Fig 7)
►Adjusting the drilling depth (Fig 8)
►Turn on / off and speed control (Fig 9)
►Attention! After the automatic shutdown
of the machine, do not immediately try to
press the switch button. Doing so may
damage the battery.
Maintenance and cleaning
►To ensure quality and safe operation,
keep the power tool and ventilation
slots clean at all times.
10