Текст страницы
3. While keeping the release button pressed, pull the stand out.
Figure 25. Pull the stand out
To remove the VESA cover
Press the dimple on the VESA cover to release it from the back of the display.
Figure 26. Remove the VESA cover
Wall mounting (optional)
Figure 27. Wall mounting
(Screw dimension: M4 x 10 mm).
See the documentation that shipped with the VESA-compatible wall mounting kit.
1.
Place the display on a soft cloth or cushion at the edge of the desk.
2. Remove the stand. See Removing the monitor stand.
3. Remove VESA cover.
4. Remove the four screws that secure the display back cover.
5. Install the mounting bracket from the wall mounting kit to the display.
6. To mount the monitor on the wall, see the documentation that shipped with the wall mounting kit.
NOTE: For use only with UL or CSA or GS-listed wall mount brackets with minimum weight or load bearing capacity of 15.04 kg
(E2725H)/14.96 kg (SE2725H).
NOTE: When using the display, fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to
prevent the monitor from falling. Installing must be done by a qualified technician, and contact your supplier for more information.
31
Setting up the monitor