Текст страницы
Table 20. OSD menu
Icon
Menu and Submenus
Description
Brightness/Contrast
Use this option to control the brightness or contrast settings.
Brightness
Brightness adjusts the luminance of the backlight.
Press the
button to increase the brightness and press the
button to decrease the
brightness (minimum 0/maximum 100).
Contrast
Adjust the brightness first, and then adjust the contrast only if further adjustment is necessary.
Press the
button to increase the contrast and press the
button to decrease the contrast
(minimum 0/maximum 100).
The Contrast function adjusts the degree of difference between darkness and lightness on
the monitor screen.
Auto Adjust
Use this option to activate automatic setup and adjust the menu.
The following dialog appears on a black screen as the monitor self-adjusts to the current input:
Auto Adjust allows the monitor to self-adjust to the incoming video signal. After using Auto
Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase
(Fine) controls under Display.
NOTE: Auto Adjust does not occur if you press the button while there are no active
video input signals or attached cables. This option is only available when you are using the
analog(VGA) connector.
36
Operating your monitor