Текст страницы
5. Leveling Platform
Z : 0.10mm 1.00mm
10.00mm
10mm
2. Gently press the platform and tighten 4 screws clockwise, and the platform can be leveled
successfully.
1. After loosening the leveling screws, press
the "Homing" on the touch screen to keep
the platform balanced with the base plate.
Z : 0.10mm 1.00mm
10.00mm
10mm
3. Move up the z-axis to a proper position, remove the calibration card and install the resin vat back, and then tighten the fixing screws at both ends of the
resin vat.
Note: The current interface is for reference only, due to the continuous upgrading of
functions, the actual to the official website of the latest firmware Ul as the standard.
01
08