Текст страницы
- Read the user agreement and press OK on the RC.
- Select the method to connect the TV to the Internet: via Wi-Fi or a local area
ATTENTION! Incorrectly installed batteries can cause an explosion. Replace
the batteries with batteries of the same or equivalent type.
Serials – the best Russian and foreign TV/movie serials*.
Bloggers – YouTube videos.
Cartoons – animation serials, short and full length animation movies*.
BASIC SCREEN FUNCTIONS
Installing the Batteries into the RC Unit
1. Open the cover on the back side of the RC unit.
2. Insert two ААА type batteries. Ensure that the “+” and “-“ markings on the
– TV Applications (see “Using the Applications” Section).
battery ends are aligned with the markings inside the battery compartment.
3. Close the battery cover.
network. If a wireless network is used, find its name on the list, press OK on
the RC and enter the network password. To connect to a local network simply
connect the LAN cable and select Local Network. If you do not wish to connect
the TV to the Internet, press Skip — the system will proceed to RC connection
(see Section 7). Note that you will not be able to watch Internet TV channels and
videos and the TV’s software will not be updated without an Internet connection.
4. The TV will start searching the Internet for software updates. Wait for the
– TV Setup (see “Setup” Section). This function can also be displayed using
the
button on the remote control.
Turning the TV On and Off
operation to complete.
5. Enter your Yandex account:
- Turning the TV on:
– Account Management (see “Add Account” Section).
- If you have the Yandex application installed in your smartphone and you are
Connect the TV to power supply. If the TV has a main power switch, switch it on
first. In the standby mode press the power button on the RC unit to turn the TV on.
- Turning the TV off:
*Requires the Yandex.Plus or KinoPoisk subscription. The current promo codes or
promo periods also apply.
authorized in it, open it, press the camera icon in the search field and scan the
QR code displayed on the TV screen.
- If you have no Yandex application, open the web browser in any PC connected
to the Internet and enter yandex.ru/activate in the search prompt. If an
authorization dialog is displayed — enter your account data. Then enter the
code from the TV screen and press Enter.
- If you use two-step authorization in your Yandex account, open the Yandex.Key
SETUP
Connect an RC Unit or Other Device via Bluetooth
If you have not already linked the RC unit and the TV via Bluetooth, you can do it
afterwards, otherwise you will not be able to use Voice Input. Besides, you can
also connect a keyboard, mouse, joystick or other control device:
application and scan the QR code displayed on the TV screen.
6. Wait for the authorization to complete and press OK on the RC.
7. A request for RC connection to the TV via Bluetooth will now be displayed. To
- In the Home Screen press , then select Device Setup and, in the RC and
Press the power button on the RC to switch the TV to standby mode.
Do not leave the TV in standby mode for a long time. It is recommended to pull
the plug from the electric socket.
NOTE:
In case of an accidental power failure the TV will automatically return to standby
mode when the power supply is restored. Avoid frequent power startups and
shutdowns in order to ensure proper functioning of the TV; it is recommended
to pull the plug from the electric socket in case of an accidental power failure.
Accessories section, select Add Device.
- Set the device to the connection mode. If you want to link an RC, simultaneously
REMOTE CONTROL UNIT (RC)
initiate the connection simultaneously press and hold the volume up and volume
down buttons until the indicator flashes. When the connection is established
the TV’s home screen will open.
press and hold both volume control buttons until the indicator flashes.
- Wait for the TV to detect the device and connect to it.
HOME SCREEN
Mute button
TV ON/OFF button
Changing the Date and Time
- In the Home Screen press , then select the Device Setup section, then select
Navigation button
OK button
Date & Time.
- Change settings:
Return button
Settings button
Voice Input button
Channel button
Home Screen button
Source selection button
Play/Pause button
Sound volume control buttons
• To enable the date and time to be automatically updated via the Internet,
press Automatic Date and Time Setup and activate the option Use Web Time.
If the time for the wrong time zone is displayed, return to the date and time
settings menu, click Select Time Zone and select the time zone of your region.
• If you wish to set the date and time manually, click Automatic Date and Time
Setup and deactivate the option Use Web Time. Then enter the desired date
and time in the date and time setup menu.
Changing the Screen Settings
- In the Home Screen press , then select Image.
- Change the settings:
NOTE:
The RC buttons may differ from the images in the User Manual.
Initial Setup
1. Connect the TV to an electric socket and press the О (ON) button on the RC unit
• Backlight. Changes the screen brightness.
• Image Mode. The brightness, contrast, edge smoothing and other settings
selected for the specific type of video. Select the mode that corresponds
to what you watch most often: e.g. the Sport mode will be best for sports
programmes and videos.
or the TV housing. Wait for the TV to start up and display the greeting message.
Then press OK on the RC.
Search – select to find a video on the Internet.
Main – TV channels and videos recommended personally to you. The more videos
and shows you view, the more accurate the recommendations will become. In this
section you can also activate “MyBroadcast”, a channel on which the programme
listing is compiled based on your preferences.
TV – analog, digital, cable, satellite and Internet channels available on the TV.
Movies – thousands of films: from the legends of cinematography to new arrivals
and exclusive offers*.
32