Disassembly and Assembly
35 Before using the adhesive for the first time, apply it to tissue or paper for about
3 seconds and discard the first part of the adhesive. After then, carefully apply
the adhesives properly into the 2 bottom holes. Stay in that condition for at least
90 minutes so that the adhesive is completely dried.
• Before using the adhesive, you must wear protective safety equipments such as glasses, gloves, and a mask for your safety.
• If the adhesive is in contact with the skin, wash it off with clean water immediately.
• Adhesive is not allowed to be used for other purposes.
• Be careful not to get stabbed or injured by needle.
• If the applied adhesives overflows, wipe it carefully with a clean and soft cloth.
• Be careful not to overturn the device or cause external impact for at least 90 minutes while drying the adhesive.
180
