Текст страницы
9
EN
• By pressing « » «▼, ▲» buttons (19), set the desired
cooking temperature for food from 80°C to 200°C, the
setting step is 5°C, the set temperature is displayed
by digital symbols (18) and the symbol (12) «°C».
• By pressing the «
» «▼, ▲» buttons (13), set the
cooking time of the products from 1 to 60 minutes,
the setting step is 1 minute, the set cooking time is
displayed by digital symbols (18) and the symbol (14)
«min».
Notes:
-
during the operation of the air fryer, you can change
the cooking temperature and the operating time of
the air fryer by pressing the buttons (19) « » «▼, ▲»
and (13) «
» «▼, ▲».
• To ensure even cooking of food, it is recommended to
remove the tray several times and place it on a heat-
resistant surface, stir or turn over the food on the grill
(3). Install the tray into the air fryer body. If necessary,
adjust the cooking temperature (see the food cooking
table).
• After finishing cooking, wait for 10-20 seconds and after
that remove the tray, put it on a heat-resistant surface,
remove the food, use kitchen tools designed for non-
stick surfaces.
• When finished, unplug the power cord (8) from the
electrical outlet.
COOKING PROGRAMS
-
the control buttons are sensory, so you just need
to touch the button, each touch (press) to the
control buttons is accompanied with a beep;
-
if during configuration of the settings, no control
buttons were pressed within 20 seconds, the air
fryer will pass into standby mode.
• To switch the air fryer on, press the on/off button (16)
«
» again, the fan on symbol (20) «
» will light
up, the digital symbols (18) will show the heating
temperature and the air fryer operating time.
• If you want to switch the air fryer off earlier, press
the «
» on/off button (16), in this case, the heating
element will be switched off, the «
» symbol (20)
will go out, the air fryer will go into standby mode.
• Insert the power cord plug (10) into the mains socket,
the symbols (18) will display «---», the «
» on/off
button (16) will light up, the air fryer is in standby mode.
• By pressing the «
» button (17), you can select one
of seven cooking programs, the symbol of the selected
program will be displayed by the indicator (11), the
default temperature and cooking time can be found in
the food cooking table.
Notes:
-
to switch the translucent lighting on, press the «
» button (15), to switch the translucent lighting off,
press the «
» button (15) again;