Текст страницы
Questions or Setup Issues?
Contact the HyperX support team at hyperx.com/support
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.
Battery Replacement
- Power OFF the headset.
- Carefully pull the left ear cushion from the headset.
- Unscrew the 4x Philips screws to separate the driver cover from the left earcup.
- Gently separate the cover from the earcup to avoid any damage.
- Locate and remove the battery secured with a connector.
- Place new battery matching correct pin orientation.
- Close the driver cover and earcup. Reverse steps 3 and 2. Make sure to push cushion into the slot all around the earcup.
- Power ON the headset and test for functionality.