Текст страницы
3 Installation
Product must be installed by a qualified person in accordance with the regulations in force. The manu
facturer shall not be held responsible for damages arising from procedures carried out by unauthorized
persons which may also void the warranty.
C
The product must be installed in accordance with all local gas and/or electrical regulations.
Preparation of location and electrical and gas installation for the product is under custom er’s responsibility. A
Prior to installation, visually check if the product has any defects on it. If so, do not have it
installed. Damaged products cause risks for your safety.
A
3.1 Before installation
The hob is designed for installation into commercially available work tops. A safety distance must be left
between the appliance and the kitchen walls and furniture. See figure (values in mm).
• Allow a minimum distance of 750 mm above the hob surface.
• (*) If a cooker hood is to be installed above the cooker, refer to cooker hood manufacturer’ instructions
regarding installation height. If not defined any size in the hood manual, this height should be at least
650 mm.
• Remove packaging materials and transport locks.
• Surfaces, synthetic laminates and adhesives used must be heat resistant (100 °C minimum).
• The worktop must be aligned and fixed horizontally.
• Cut aperture for the hob in worktop as per installation dimensions.
• This product is a class 3 device according to EN 30-1-1standard.
* Minimum height to extractor as recommend in hood instruction manual. If not recommended in the
hood instruction manual, this height should be at least 650 mm.
Built-in Hob / User Manual
15 / EN