Текст страницы
10
EN
Note: if no actions are taken for 10 minutes, the Display
(13) and the operation modes indicators will turn off
automatically.
• To turn off the fan, press the «
» button (8) on the
Control Panel (4) or the «
» button (18) on the
Remote Control (22) and remove the Power Cable
(7) plug from the mains.
the Timer operation time will appear on the Display
(13) as flickering numeric symbols «00».
• Press again the buttons (12 or 20) to set the timer
operation time. Timer operation time can be set from
1 hour to 12 hours with 1 hour setting step.
• To turn off the Timer press the button (12 or 20)
repeatedly until the Display (13) shows numeric
indication with the value of «00».
Switching the fan body oscillation on/off
CLEANING AND MAINTENANCE
• To turn the oscillation mode on, press the «
» button (17) on the Control Panel (4) or the «
» button (23) on the Remote Control (22), the «
» indicator (16) will turn on, to turn off the oscillation
mode, press the «
» button (17) on the Control
Panel (4) or the «
» button (23) on the Remote
Control (22), the «
» indicator (16) will turn off.
The display backlight on/off button
• Before cleaning the fan, switch it off (7) and unplug it.
• Wipe the fan body with a slightly damp cloth and then
wipe it dry.
• Do not use liquid detergents, abrasive cleaners and
any solvents to clean the fan (2).
• To avoid the risk of electric shock provide that no
water or other liquid gets into the fan body.
• You can use a vacuum cleaner with an appropriate
attachment to clean the Air-Inlet Grill (6) and the
Outgoing Airflow Grill (3).
STORAGE
• After cleaning put the fan away for storage in a dry
cool place away from children and disabled persons.
• Before using the fan next time, it is recommended to
check the unit operability and integrity of the power
cord isolation and the power cord plug.
• To turn off the Display backlight, press the «
» button (10) on the Control Panel (4) or the «
»
button (24) on the Remote Control (22), the Display
(13) and Indicators (9, 11, 14, 16) backlight will turn
off. To turn the Display (13) and the operation modes
indicators backlight off, press the «
» button (10) on
the Control Panel (4) or the «
» button (24) on the
Remote Control (22), the Display (13) and indicators
backlight will turn on.