Текст страницы
For troubleshooting, insert a USB drive into the K15’s USB-A port and select
Factory Debugging. The system will save diagnostic logs (non-user data) into a
fiio_log folder on the drive. Share this folder with FiiO support for analysis.
About K15:
Displays firmware versions for MCU, SOC, FPGA, and the number of songs scanned
from a USB drive. When connected to a network, it also shows the K15’s IP address
to verify LAN connectivity with other devices.
7. Network Connection
The K15 supports both WiFi (2.4G/5G dual-band) and wired network connections.
In the "Network Settings" menu, first select the network you wish to connect to.
Wired Network:
After plugging the network cable into the Ethernet port on the back of the K15,
select "Wired Network" in the menu. The K15 will automatically connect to the
network. The wired network supports three speeds: 10M/100M/1000Mbps. Once
connected, the network icon in the status bar on the K15's main interface will
display as connected. Additionally, the network IP can be viewed in the "Device
Information" menu.
Ethernet
Ethernet
connected
disconnected
23