Текст страницы
- Select the operating speed using the speed selector (2).
- You can now proceed to beard modeling, haircut trimming or
removing unwanted hair from your body.
- Install the comb attachment on the attachment if
necessary.
CLEANING THE NOSE AND EAR HAIR TRIMMING ATTACHMENT
Clean the nose and ear hair trimmer attachment with the
brush. Please place the appliance and all its accessories on
the stand after the cleaning is over to avoid damaging the
appliance or losing the accessories.
BLADE LUBRICATION INDICATOR
After the appliance has been operated for 30
minutes this indicator will start flashing at an
0.5 second interval to warn you that the blade
needs to be lubricated. The indication will go
out when the appliance is restarted.
6. SPECIFICAIONS
- Input voltage / current: 5 V
1 А
- Power: 5 W
- Power supply: battery Li-Ion, 1200 mAh,
5 V
1 А
- Full charge time: 1,5 hours
5. MAINTENANCE
ATTENTION!
- Ensure that the appliance is turned off and the USB power
cable disconnected from power supply.
- Wipe the appliance’s housing with a wet cloth. Avoid water
getting inside the housing.
- Do not use abrasive products and solvents for cleaning the
appliance.
- Never clean the appliance by submerging it in water.
NOSE AND EAR HAIR TRIMMING ATTACHMENT
- Install the nose and ear hair trimming attachment on the
appliance’s main housing.
- Press the power button.
- Place the tip of the trimmer inside your nostril. Make
circular movement while inserting and withdrawing the
attachment. Use this attachment for trimming your nasal
and aural hair, as well for trimming the edges of your
eyebrows; do not use it to clip the eyebrows themselves.
NOTE: Before using the attachment, ensure that your nasal
cavity is clean. Please do not insert the trimmer tip into your
nasal or aural cavity deeper than 0.5 cm.
7. DISPOSAL
Upon expiry of its service life the appliance can be disposed of
separately from ordinary domestic waste. You can turn it over
to a specialized electric and electronic appliance disposal and
recycling centre.
LED DISPLAY
CLEANING THE HAIR-TRIMMING ATTACHMENT
- Press the upper part of the paddle and disconnect the blade
from the attachment head.
- Clean the hairs out of the attachment with the brush.
- Reinstall the blade into the attachment head and apply a
drop of oil to the blade.
BATTERY CHARGE INDICATOR
When the hair trimmer is on the digital
display will show the remaining battery
charge and the battery symbol underneath
will be illuminated.
CLEANING THE SHAVER ATTACHMENT
- Remove the shaver head from the shaver attachment
by pressing the buttons on both sides of the shaver
attachment.
- Shake hairs out of the shaver attachment.
- Clean the remaining hairs out with the brush.
- Reinstall the shaver attachment by seating it on until a
click is heard.
CHARGING INDICATOR
- The indicator will blink during charging
and light continuously when the charge
reaches 100 %.
- The indicator will start blinking when the
charge drops below 5 % to warn you of the
need to charge the battery.
8. CERTIFICATION DATA, GUARANTEE
The service life of this item is 5 years since the date of
sale to the end user, provided the item will be used in strict
accordance with the present manual and the applicable
technical standards. Upon expiry of the service life please
contact the nearest authorized service centre for suggestions
as to further operation of the appliance. The manufacturing
date of the appliance is integrated into the serial number
(digits 2 and 3 - year, digits 4 and 5 - month of manufacture). If
any questions related to appliance maintenance should arise,
or if the appliance has malfunctions, apply to the CENTEK TM
Authorized Service Center. The address of the service center
can be found on the website https://centek.ru/servis. Service
support contacts: Phone: +7 (988) 24-00-178, VK: vk.com/
16