Текст страницы
Circular Saw
Contents of delivery
Circular saw
1 pc
Woodworking saw blade
1 pc
Parallel stop
1 pc
Wrench
1 pc
Chip ejector
1 pc
Instruction manual
1 pc
Assembly
Mounting/Replacing the Saw Blade
ting lines as well as mitre cuts in wood while
resting firmly on the workpiece. With suitable
saw blades, thin-walled non-ferrous metals, e.
g., profiles, can also be sawed.
Working ferrous metals is not permitted.
Product Features
The numbering of the product features refers
to the illustration of the machine on the graph-
ics page.
1.Protection guard
2.Lock-on button for On/Off switch
3.On/Off switch
4.Auxiliary handle (insulated gripping surface)
5.Spindle lock button
6.Scale for mitre angle
7.Wing screw for tilt adjustment
8.Wing screw for rip fence
9.Mark for the angle of cut at 45 °
10.Mark for the angle of cut at 0 °
11.Rip fence
12.Movable guard
13.Lever for opening the movable guard
14.Base plate
15.Chip ejector
16.Wrench
17.Clamping bolt with washer
18.Clamping flange
19.Saw blade
20.Mounting flange
21.Saw spindle
22.Handle (insulated gripping surface)
23.Clamping lever for cutting-depth preselec-
tion
24.Cutting-depth scale
Technical Parameters
Model
PKS165-C
Rated voltage
220 V~/50 Hz
Power
1200 W
Rotating speed
5500 r/min
Saw blade diameter
165 mm(6-1/2")
Cutting depth
(Max.)45°/ 90°
36 / 54 mm
Weight
3.7 kg
Note
Since the product is constantly being
improved, P.I.T. reserves the right to make
changes to the specifications and product
specifications specified here without prior
notice.
Before any work on the machine itself, pull
the mains plug.
►When mounting the saw blade, wear
protective gloves.Danger of injury when
touching the saw blade.
►Only use saw blades that correspond
with the characteristic data given in the
operating instructions.
►Do not under any circumstances use
grinding discs as the cutting tool.
Removal of the Saw Blade (see figure
A)
For changing the cutting tool, it is best to
place the machine on the face side of the mo-
tor housing.
–
Press the spindle lock button and keep it
pressed.
The spindle lock button may be actuated
only when the saw spindle is at a stand-
still. Otherwise, the power tool can be
damaged.
–
Use the supplied wrench to remove the
screw that secures the drive.
–
Tilt back the retracting blade guard and
hold firmly.
–
Remove the clamping flange and the saw
blade from the saw spindle.
Mounting the Saw Blade (see figure
A)
For changing the cutting tool, it is best to
place the machine on the face side of the mo-
tor housing.
–
Clean the saw blade and all clamping parts
to be assembled.
–
Tilt back the retracting blade guard and
hold firmly.
–
Place the saw blade on to the mounting
flange. The cutting direction of the teeth
(direction or arrow on saw blade) and the
direction of rotation arrow on the blade
guard must correspond.
–
Mount the clamping flange and screw in
the clamping bolt turning in rotation direc-
tion.Observe correct mounting position of
mounting flange and clamping flange.
6