Текст страницы
Circular Saw
precipitation. Remove the exchange tool from
the power tool before transporting it.
Dispose of waste
Damaged power tools, batteries, acces-
sories and waste packaging materials
must be recycled and reused in an envi-
ronmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
Sawing Wood
The correct selection of the saw blade de-
pends on the type and quality of the wood
and whether lengthway or crossway cuts are
required.
When cutting spruce lengthways, long spiral
chips are formed.
Beech and oak dusts are especially detrimen-
tal to health. Therefore, work only with dust
extraction.
Sawing with Parallel Guide (see figure D)
The parallel guide enables exact cuts along a
workpiece edge and cutting strips of the same
dimension.
Loosen wing bolt and slide the scale of the
parallel guide through the guide in the base
plate. Adjust the desired cutting width as the
scale setting at the respective cutting mark;
see Section “Cutting Marks”. Tighten wing bolt
again.
Maintenance and Service
Maintenance and Cleaning
►Before any work on the machine itself,
pull the mains plug.
►For safe and proper working, always
keep the machine and ventilation slots
clean.
Saw blades that are not coated can be pro-
tected against corrosion with a thin coat of
acid-free oil. Before use, the oil must be re-
moved again, otherwise the wood will become
soiled.
Resin and glue residue on the saw blade
produces poor cuts. Therefore, clean the saw
blade immediately after use.
If you need to change the cord, contact P.I.T
or an Authorized P.I.T. Power Tool Service
Center.
Service
►Have your power tool repaired only by
qualified personnel and only with original
spare parts. This ensures the safety of the
power tool.
The list of authorized service centers can be
viewed on the official website of P.I.T. by the
link: https://pittools.ru/servises/
Storage and transportation
Store the instrument in an enclosed area with
natural ventilation in its packaging at an air
temperature from 0 ° C to + 50 ° C and an air
humidity of no more than 80%.
Products can be transported by any type of
closed transport in the manufacturer’s pack-
aging or without it, while preserving the prod-
uct from mechanical damage, atmospheric
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The first 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu-
ment that confirms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certificates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
full model name of the purchased P.I.T. prod-
uct, the serial number on the nameplate of the
fuselage, and the date of purchase, and the
required warranty. The whole machine and its
accessories.
The warranty period:
1. The warranty period of the product is 12
months from the date of sale. During the
warranty period, the service department
will eliminate manufacturing defects free of
charge and replace the parts that fail due to
the manufacturer’s fault. In warranty repair, an
equivalent operable product is not provided.
Replaceable parts become the property of the
service provider.
2. The wear degree on the diameter of the
motor rotor commutator is less than 0.4 mm
(except for brushless motor tools), and the
internal damage caused by the quality of the
tool belongs to the warranty.
The following situations occur during the
warranty period, which is not covered by the
warranty:
8