Текст страницы
EN
How to Use
One-Press Self-Cleaning
1. Place the appliance back onto the base while you finish cleaning. Ensure that the water
in the Clean Water Tank is sufficient for self-cleaning.
2. Briefly press the self-cleaning button on the top of the handle, the self-cleaning
indicator will light up, and the appliance will start self-cleaning.
3. Please empty the Used Water Tank after self-cleaning is completed and drying mode
has been engaged. Press the button
to exit the drying mode.
Note: The self-cleaning function can be enabled only when the appliance is being charged and the
battery level is more than 20%.
Drying Mode
1. Press and hold self-cleaning button
for 3
seconds to activate drying mode.
2. The appliance will be charged once drying is
completed.
Minimum Water Level of Self-Cleaning
minimum water level of self-cleaning
Note:
• After self-cleaning is complete, promptly clean the Used Water Tank. Clean the charging base if
there are any stains left on the base.
• If cleaning the brush roller manually, please air dry thoroughly or dry it by using drying mode
several times.
11
11