Текст страницы
EN Care & Maintenance
Cleaning the Tube and the Dirt Sensor
Remove the Used Water Tank, gently wipe the tube
and the dirt sensor with a wet cloth before use.
Dirt Sensor
Cleaning the Brush Assembly
1. First, press the brush roller cover
release buttons inwards on both sides to
remove the brush roller cover. Press the
brush roller release button, and the brush
roller handle will pop out. Pull it to take
out the brush roller.
2. Clear the hair and debris tangled on the
brush roller with the provided cleaning
brush. Rinse the brush roller with clean
water. Air dry the brush roller thoroughly,
or dry it by activating the drying mode
several times.
1
2
4. Re-install the brush roller and the
brush roller cover until you hear a click.
3. Wipe the suction inlet with a dry cloth
or wet tissue. Do not rinse the brush
assembly with water.
Note:
- Clean as needed. Alternating use of the two provided brush rollers is recommended.
- Replacing the brush roller every 3 to 6 months is recommended.
13
13