Текст страницы
English | 13
Safety Warnings for Sander
u Only use the power tool for dry sanding. Water entering
Product Description and
Specifications
a power tool will increase the risk of electric shock.
u Ensure that no persons are at risk due to flying sparks.
Remove combustible materials from the surrounding
area. Flying sparks are created when sanding metals.
u Warning: Danger of fire! Avoid overheating the work-
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding of wood, plastic,
metal, filler and varnished surfaces.
Power tools with electronic control are also suitable for pol-
ishing.
piece and the sander. Always empty the dust collector
before taking a break from work. Sanding dust in the
dust bag, microfilter, paper bag (or in the filter bag or va-
cuum cleaner filter) can spontaneously combust under
certain conditions, for example if flying sparks are cre-
ated when sanding metals. This risk is increased if the
sanding dust is mixed with paint or polyurethane residue
or with other chemical substances and if the workpiece is
hot as a result of prolonged work.
Product Features
u Clean the air vents on your power tool regularly. The
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
On/off switch
(2)
Orbital stroke rate preselection thumbwheel
(GEX 125-1 AE)
(3)
Complete dust box (Microfilter system)
(4)
Handle (insulated gripping surface)
(5)
Sanding pad
(6)
Sanding sheet A)
motor’s fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
u Always wait until the power tool has come to a com-
(7)
Screws for sanding pad
(8)
Extraction outlet
(9)
Filter element (Microfilter system)
(10) Dust extraction hose A)
plete stop before placing it down.
A) Accessories shown or described are not included with the
u Secure the workpiece. A workpiece clamped with
product as standard. You can find the complete selection of
accessories in our accessories range.
clamping devices or in a vice is held more secure than by
hand.
Technical Data
Random orbit sander
GEX 125-1 A
GEX 125-1 AE
Article number
3 601 C87 0..
3 601 C87 5..
Orbital stroke rate preselection
–
●
Rated power input
W
250
250
No-load speed n0
min-1
12,000
7500–12,000
No-load orbital stroke rate
min-1
24,000
15,000–24,000
Orbit diameter
mm
2.5
2.5
Sanding disc diameter
mm
125
125
Weight according to EPTA-Procedure 01:2014
kg
1.3
1.3
Protection class
/ II
/ II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted sound pressure level of the power
tool is 77 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Bosch Power Tools
1 609 92A 4AG | (04.11.2020)