Текст страницы
Removing the Door
Maintenance
Follow these tips to get the best performance from your camera:
REATTACHING THE DOOR
1. Line the door up with the small silver bar.
• The lenses are made to be extremely tough, but can still be
scratched or cracked. Keep them clean with a soft, lint-free cloth.
2. Press the door tightly into the small silver bar until it snaps into
place and is securely attached.
• Your GoPro is waterproof to 16ft (5m) to protect against splashes
and drops in the water. Be sure the door is closed before using it in
or around water, dirt, or sand.
• Before closing the door, be sure the seal is free of debris. Use a
cloth to clean the seal if needed.
• Make sure your GoPro is dry and clean before opening the door.
Rinse your camera with fresh water and dry it with a cloth if needed.
• If sand or debris hardens around the door, soak your camera in
warm tap water for 15 minutes and then rinse thoroughly to remove
the debris. Make sure your camera is dry before opening the door.
WARNING: Your camera’s door is removable. Be sure that
the door is securely locked and sealed after closing.
• For the best audio performance, shake your camera or blow on the
mic to remove water and debris from the microphone holes. Do not
use compressed air to blow into the mic holes. This could damage
the internal waterproof membranes.
• After every use in salt water, rinse your camera with fresh water,
and dry it with a soft cloth.
• If debris gets stuck between the lens and trim ring, flush it out
with water or air. Do not insert foreign objects around the lens.
74
75