Текст страницы
GO Ultra User Manual
二、First Use
2.1 Image storage
The camera uses a MicroSD card to store the captured image files. Push open the
memory card cover on the side of the single camera to insert the MicroSD card.
This device recommends using UHS-I, V30 and above micro SD/TF memory cards
with exFAT format. Too low speed may cause the recording to fail. Do not use UHS-II,
UHS-III or memory cards exceeding 1TB, as the recording may stop due to
compatibility issues.
2.2 Powering On
Align the camera with the contact pins and insert it into the Action Pod. Press and
hold the power button on the Action Pod for 2 seconds to power on.
To remove the camera, press and hold the release button while pulling out the
camera module.
7