Текст страницы
1.2. Electric safety,
-Connect the product to a grounded outlet protected by a fuse in accordance
with the values in the specification table.
-Have the grounding installation of your house done by a qualified electrician.
Our company will not be responsible for any damages that may occur if the pro-
duct is used without grounding in accordance with local regulations.
-Oven circuit breaker switches must be within the reach of the end user when
the oven is in place.
-The power supply cord (cable with plug) must not touch the hot parts of the
appliance.
-If the supply cord (cable with plug) is damaged, it must be replaced by the
manufacturer or its service agent or an equally qualified personnel to prevent a
dangerous situation.
-Never wash the product by spraying or pouring water on it! There is a risk of
electric shock.
-To avoid the possibility of electric shock, make sure that the appliance is switc-
hed off before replacing the lamp.
-All supply circuit connections must be disconnected before accessing the ter-
minals.
-When the oven is in operation, the back of the oven heats up. The electrical
connections must not touch the back surface as this may damage the connecti-
ons.
-Do not pinch the connection cables to the oven door and do not pass them
over hot surfaces. Melting of the cable may cause the oven to short-circuit and
cause a fire.
-Unplug the product during installation, maintenance, cleaning and repair ope-
rations.
-Make sure that the product plug is securely fixed to the socket to prevent
sparks.
-The product must be installed in such a way that the electrical wiring can be
completely disconnected. The disconnection must be carried out with a switch
in accordance with building regulations or with an integrated fuse connected to
the fixed electrical installation.
-The product uses a type “Y” cord cable.
-Fixed connections must be connected to an installation that ensures complete
separation of all poles. Under overvoltage category III, the disconnection rules
must be connected to the fixed installation in accordance with the wiring rules.
45