Текст страницы
and cause the glass to shatter.
• The oven must be switched off before removing the removable
parts. After cleaning, reassemble them according the
instructions.
• Only use the meat probe recommended for this oven.
• Do not use a steam cleaner or high pressure spray for cleaning
operations.
• WARNING: the appliance and accessible parts become hot
during use. Be careful not to touch any hot parts.
• WARNING: ensure that the appliance is switched off before
replacing the bulb, to avoid the possibility of electric shocks.
• IF THE OVEN IS PROVIDED BY THE MANUFACTURER
WITHOUT PLUG:
THE APPLIANCE MUST NOT BE CONNECTED TO THE POWER
SOURCE USING PLUG OR SOCKETS, BUT MUST BE DIRECTLY
CONNECTED TO THE SUPPLY MAINS. The connection to
the power source must be carried out by a suitably qualified
professional. In order to have an installation compliant to the
current safety legislation the oven must be connected only
placing an omnipolar breaker, with contact separation compliant
to the requirements for overvoltage category III, between the
appliance and the power source. The omnipolar breaker must
bear the maximum connected load and must be in line with
current legislation. The yellow-green earth cable should not
be interrupted by the breaker. The omnipolar breaker used for
the connection must be easily accessible when the appliance is
installed.
The connection to the power source must be carried out by a
suitably qualified professional considering the polarity of the
oven and of the power source.
The disconnection must be achieved incorporating a switch in
the fixed wiring in accordance with the wiring rules
• IF THE OVEN IS PROVI ED BY THE MANUFACTURER WITH
PLUG:
EN 35