Текст страницы
Management Options
LEDs
LED
Colour
Status
Description
The DGS-1210-10MP switch can be managed through
the Web UI.
Green
Solid
The switch is powered on
Power
Light off
The switch is powered off
There is a secure
Solid
If you want to manage only one D-Link Smart switch, the
Web-based management is the better option. Each switch
must be assigned its own IP address, which is used for
communication with Web UI. The PC should have an IP
address in the same range as the switch.
1000 Mbps
connection at the port
Green
There is reception or
1. Web-Based Management Interface
Blinking
transmission occuring
at the port
There is a secure
Link/
Activity/
Speed
(Ports 1-8)
Solid
10/100 Mbps
connection at the port
Amber
After a successful physical installation, you can
configure the switch, monitor the LED panel and
display statistics graphically using a Web browser,
such as Microsoft Internet Explorer, Firefox, Chrome or
Safari.
There is reception or
transmission occuring
Blinking
at the port
You need the following equipment to begin the web
configuration of your device:
Light off
Link down or no link
• A PC with a RJ-45 Ethernet connection
There is a secure
Solid
• A standard Ethernet cable
1000 Mbps
connection at the port
Green
1. Connect the Ethernet cable to any of the ports in front
There is reception or
panel of the switch and to the Ethernet port on the PC.
Blinking
transmission occuring
at the port
There is a secure
Link/
Activity/
Speed
(Ports 9-10)
Solid
100 Mbps
connection at the port
ENGLISH
Amber
There is reception or
transmission occuring
Blinking
at the port
Link down or no link
Light off
Green
Solid
Power feeding
2. In order to log in the Web UI, the PC must have an
Amber
Solid
Error condition
Power Fail/
Power Ok
(Per PoE port)
IP address in the same range as the switch. For
example, if the switch has an IP address of 10.90.90.90,
the PC should have an IP address of 10.x.y.z (where
x/y is a number between 0 and 255, z is a number
Light off
No power feeding
between 1 and 254) and a subnet mask of 255.0.0.0.
Amber
Solid
Max. PoE power budget
is reached
PoE Max
Max. PoE power budget
Note: The switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and a
default gateway of 0.0.0.0.
Light off
is not reached
4