Текст страницы
ENG
PC Gamepad
Fig. 9
Fig. 10
• By pressing the «Both force» button, in the «Vibration Test»
tab, you can check the operation of both vibrators together or
separately, by pressing the «Left force» and «Right force»
buttons. Also you can do it by rotating the left joystick in the
analog mode of operation or by pressing the D-Pad in the
digital mode of operation (Fig. 12). To stop the test, press the
«Stop» button. Moving the cursor in the row «Vibration
strength» we can increase or decrease the force of vibration.
To save the settings, click «Apply» or «OK» button in the
bottom line of this window.
• The «About» tab provides information about the version of
the installed driver.
• TURBO mode.
This mode allows you to emulate a rapid repeated press of
a button while holding it. To assign the selected button to this
function, it must be clamped simultaneously with the TURBO
button. Press the TURBO button and the CLEAR button
simultaneously to reset the function.
• There are analog and digital modes. The modes are
switched by briefly pressing the HOME button. In digital
mode, two axes are available, and in analog mode all 4 axes
are available.
• With PS3.
Connect the gamepad to an available USB port. The system
will automatically establish a connection, and the LED
corresponding to the number of the gamepad in the system
will light up.
• With Android.
To connect to devices running Android, you need a USB OTG
cable (not included). After connecting the gamepad with this
cable, the system will automatically establish a connection,
and the first LED will light up.
• Gamepad charge.
Connect the gamepad to the PC USB port or to the USB
charger using the USB - micro USB cable (included). During
charging all LEDs blink at the same time.
18