Текст страницы
2-6
Back Panel Connectors
Q-Flash Plus Button (Note 1)
This button allows you to update the BIOS when the power connector is connected but the system is not
powered on.
Antenna Connectors (2T2R)
Use this connector to connect an antenna.
Ensure the antenna is securely connected to the antenna connectors and then aim the antennas
correctly for better signal reception.
USB 2.0/1.1 Port
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.
USB 3.2 Gen 1 Port
The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specification and is compatible to the USB 2.0
specification. Use this port for USB devices.
HDMI Port (Note 2)
The HDMI port is HDCP 2.3 compliant and supports Dolby TrueHD and DTS
HD Master Audio formats. It also supports up to 192KHz/24bit 7.1-channel
LPCM audio output. You can use this port to connect your HDMI-supported monitor. The maximum
supported resolution is 4096x2160@60 Hz, but the actual resolutions supported are dependent on the
monitor being used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(The item name may differ depending on your operating system.)
USB4® USB Type-C® Port (DisplayPort (Note 2))
This port supports standard USB4® USB Type-C® and DisplayPort display output. You can connect a USB4®
USB Type-C® monitor to this port or use an adapter cable to connect a standard DisplayPort monitor. The
maximum supported resolution is 3840x2160@240 Hz when using a DisplayPort monitor, but the actual
resolutions supported are dependent on the monitor being used. Also, the connector is reversible and
supports the USB4® specification and is compatible to the USB 3.2 Gen 2x2, USB 3.2 Gen 2, USB 3.2
Gen 1, and USB 2.0 specifications. You can use this port for USB devices, too.
(Note 1) To enable the Q-Flash Plus function, please navigate to the "Unique Features" page of GIGABYTE's
website for more information.
(Note 2) Actual support may vary by CPU.
- 17 -