Текст страницы
50 English
ASSEMBLE THE FEET – Only in model MHE 33
Your hob has 4pc feet, be packed as accessories, please assemble the feet to the hob
by yourselves if need it. Find the 4pcs feet first, then screw up the feet into the 4 holes
reserve in 4 corners of metal base.
Connecting the hob to the mains power
supply
The power supply should be connected in
compliance with the relevant standard, or
a single-pole circuit breaker. The appliance
have a large power rating and must be con-
nected to electricity by a Qualified Electrician.
The method of connections shown below:
Notes:
1. If the cable is damaged or needs replacing, this should be done by an aftersales
technician using the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omni polar circuit
breaker must be installed with a minimum gap of 3mm between the contacts.
3. The installer must ensure that the correct electrical connection has been made and
that it complies with safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by qualified technician.