Текст страницы
51 English
Cautions
1. The hob must be installed by qualified personnel or technicians. Please never conduct
the operation by yourself.
2. The electric hob shall not be mounted to cooling equipment, dishwashers and rotary
dryers.
3. The electric hob shall be installed such that better heat radiation can be ensured to
enhance its reliability.
4. The wall and induced heating zone above the work surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be heat resistant.
6. A steam cleaner is not to be used.
7. This electric hob can be connected only to a supply with system impedance no
more than 0.427 ohm. In case necessary, please consult your supply authority for system
impedance information.
Note: For some of the models, there might applied with a power cord with plug. If
so, you can directly plug in socket. Please keep power cord plug out after use, for those
model power cord without plug.
Connecting the hob to electricity — Only in model MHE 33
; This hob is assembled with a 16A VDE plug power code, you can find the nearest stan-
dard 230V socket, plug in and start cooking.
; If the cable is damaged or needs replacing, this should be done by an after-sales tech-
nician using the proper tools, so as to avoid any accidents.
; The cable must be checked regularly and only replaced by qualified technician.