Текст страницы
Mount Your Camera
When you finish adding your camera in the Tapo app, you can mount it on a wall or ceiling with the provided mounting template and screws. You can
also mount it on the pole with mounting loops. Follow the steps below to mount your new camera.
Note: The camera is not waterproof when set on a table or shelf. Mount the camera via Option 1-3 when installing outdoors.
Option 1: Wall Mount
3. Mount the Camera
1. Affix the Camera and Bracket
Insert four mounting anchors into
the holes, then use the mounting
screws to affix the camera and
bracket over the anchors.
Route the camera power cord
through the opening of the
bracket. Use two bracket screws
to affix the bracket and the
camera.
2. Drill Holes
Φ=6 mm (15/64 in.)
Male Power Connector Waterproof Seal Female Power Connector
Connect the camera to a power
outlet using the provided power
adapter. Install the waterproof
seal for the power connectors.
4. Power Up the Camera
Stick the mounting template to
the desired mounting place. Drill
four screw holes according to
the template.
7