Текст страницы
4. Adjust Solar Panel Angle
5. Install Camera & Adjust Angle
6. Connect to the Camera
Install the camera onto the bracket and adjust
the camera angle as per the camera's guide.
Loosen the adjustable screw, tilt the solar
panel to adjust the angle, and then tighten the
adjustable screw.
Insert the waterproof gasket into the camera’s
charging port. Ensure that the gasket is tightly
sealed. Then, connect the solar panel to the
camera.
The recommended tilt angle between the
panel and the horizontal ground is 35° ~ 45°.
Camera-
suggested
Angle
35°-45°
For detailed connection instructions, please
refer to https://www.tp-link.com/support/
faq/3800/
Ensure the camera is securely attached to
the camera bracket by tightening the bottom
screw.
15