Текст страницы
PHONE SETUP:
CONNECTING THE PHONE:
Wall mount
To setup the GRP2670, follow the steps below:
1. Connect the handset and main phone case with the phone cord.
Slots for the
wall mount
spacers and
phone stand
2. Connect the 12V DC output plug to the power jack on the phone; plug the
Power
Headset Port
power adapter into an electrical outlet. If PoE switch is used in step 3, this
step could be skipped.
Phone Stand
Kensington
Lock
3. Network connection is possible via two methods which are described below.
Handset Port
USB Port
LAN Port
Using Ethernet:
PC Port
• Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or
a router (LAN side of the router) using the Ethernet cable.
Installing the phone (Wall Mount *sold separately):
Using WiFi:
1. Attach the wall mount spacers to the slot for wall mount spacers on the back
of the phone.
• On LCD menu, navigate to “System→WiFi settings” and enable WiFi.
2. Attach the phone to the wall via the wall mount hole.
• Select “Scan” and GRP2670 will automatically start scanning within the
range.
3. Pull out the tab from the handset cradle (See figure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the
• A list of WiFi networks will be displayed. Select the desired network, and
if required, enter the correct password to connect.
handset while the phone is mounted on the wall (See figure below).
4. The LCD will display provisioning or firmware upgrade information. Before
Wall mount
continuing, please wait for the date/time display to show up.
Tab with exten
sion up
Handset Rest
5. Using the phone embedded web server or keypad configuration menu, you
can further configure the phone using either a static IP or DHCP.
PHONE DESCRIPTION:
Tab with exten
sion down
Installing the phone (Phone Stand) :
Navigation keys
7” Touch Screen
For installing the phone on the table with the phone stand, attach the phone stand
to the bottom of the phone where there is a slot for the phone stand. (Upper half,
bottom part).
Menu/OK key
Message
Hold
Standard keypad
Transfer
Headset
Mute
Volume
Send
Speaker
~3~
~4~