Текст страницы
TROUBLESHOOTING
REPLACEMENT PLASMACLUSTER
ION GENERATING UNIT MODEL
Consult your dealer when purchasing a replacement
Plasmacluster Ion Generating Unit.
IZ-C90ME
Before calling for service, please review the
Troubleshooting list below, since the problem
may not be the product malfunction.
Odor and smoke persists.
Remove the claw of Unit Holder ( 1 ), and
remove the Plasmacluster Ion Generating
Unit ( 2 ).
• Check the filters. If they appear to be extremely
dirty, clean or replace them.
Air discharged from the product has an
odor.
Attach the New Unit.
• Check to see if the filters are extremely dirty.
• Clean or replace the filters.
• Use only fresh tap water. Using other water
sources risks the growth of mold, fungi, or
bacteria.
ENGLISH
The product does not operate when
cigarette smoke is in the air.
• When the Plasmacluster Ion Generating Unit has been
replaced with a new part, the timer will be reset and
return to 19,000 hours.
• Make sure the product is installed in a location in
which the sensors can detect cigarette smoke.
• Check to see if the Sensitive Dust Sensor
openings are blocked or clogged. If they are
blocked or clogged, clean the Sensor Filter or the
Back Panel.
DISPOSING OF PLASMACLUSTER
ION GENERATING UNIT
Smell from a new product and/or filter.
Dispose of used Plasmacluster Ion Generating Unit
according to local laws and regulations.
• Immediately after removing the plastic bag, a
slight odor may occur. This odor is not harmful for
filter performance or human exposure.
Material:
• Polybutylene Terephthalate
• electronic parts
The product makes a clicking or ticking
sound.
• The product may make clicking or ticking sounds
when it is generating ions.
The Cleanliness Indicator is blue even
when the air is not clean.
• The air may have been dirty when the product
was plugged in. Unplug the product, wait one
minute, and then plug the product in again.
The Cleanliness Indicator is red even
when the air is clean.
• Dirty or clogged Sensitive Dust Sensor openings
interfere with sensor operation. Gently clean the
Sensor Filter or the Back Panel.