Текст страницы
DESCALING AND CLEAN CYCLE
DESCALING
RUNNING A CLEAN CYCLE
ENGLISH
4 Place the cleaning disc on top of the double
basket, with the handle facing up.
Time to complete: approximately 90 minutes.
Time to complete: approximately 6 minutes
8 The machine will start the descale cycle. The
machine will flush solution through the steam
wand and portafilter for approximately 90
minutes. The machine will count down the
remaining time on the control panel.
When the DESCALE light illuminates, you must run
a descale cycle. If a descale isn’t performed after
the light turns on, drink quality will diminish and the
machine may clog and stop working.
9 The machine will beep indicating when the
descale cycle is complete.
10 After the cycle is complete, remove the
portafilter, main drip tray, and milk jug with
caution, as there will be water in each.
Descaling breaks down and removes limescale
and mineral buildup inside the machine. Doing this
will help maintain peak performance if routinely
performed with a descale solution whenever the
DESCALE light turns on
5 Place 1 cleaning tablet in the centre of the
cleaning disc.
A clean cycle flushes out residual oils or
grounds that are built up in and around the
group head. The CLEAN light will automatically
illuminate to indicate when a clean cycle is
required. You may also run a clean cycle if you
notice a change in brew quality. The clean cycle
requires the cleaning disc (included with the
machine and storable in the accessory storage)
and a cleaning tablet (also included and
available for purchase on
ninjakitchen.eu/ninja-parts-accessories/ ).
11 Empty the contents of each and hand-wash with
warm, soapy water to remove any solution that
could affect the flavour of your coffee.
Follow these steps to run a clean cycle:
12 Fill the reservoir with fresh water up to, but not
exceeding, the Max Fill line.
1 Ensure the main drip tray is completely emptied,
as some of the water brewed from the descale
cycle will be deposited into the main drip tray.
Not emptying the main drip tray may cause
overflow.
13 Install the main drip tray back on the machine
and install the portafilter in the group head. Do
not install the milk jug.
1 Ensure the main drip tray is completely
empty as the water brewed from the clean
cycle will be deposited into the main drip tray.
Not emptying the main drip tray may cause
overflow.
14 Flush the group head by running a M+ size
CLASSIC brew.
6 Fasten the portafilter in the group head.
15 Then, with the milk jug uninstalled, flush the
steam wand by pressing the PURGE button.
7 Press the CLEAN button, then press the
centre dial to start the clean cycle.
8 The machine will start the process of
backflushing the shower screen and group
head and depositing the water and sediment
from the clean cycle into the main drip tray.
2 Dissolve the provided Ninja descale powder
in a separate container with 1.1L of water. Pour
solution mixture into water reservoir.
9 The clean cycle will take approximately
6 minutes to complete. The machine will beep
when the clean cycle is complete.
2 Fill the water reservoir up to but not
exceeding the Max Fill line.
3 Insert the double basket in the portafilter.
10 After the clean cycle is complete, remove
both the portafilter and main drip tray with
caution, as there may be water in both. Hand-
wash with warm soapy water.
NOTE: Empty indicator is removable.
OR
Fill the water reservoir with 500ml of white
vinegar, then fill the reservoir to the Descale line
with water.
3 Insert the double basket into the portafilter.
4 Fasten the portafilter into the group head.
5 Ensure milk jug is placed on the milk jug platform
with the steam wand inside.
6 Place an empty cup (at least 550ml) under the
portafilter. You may have to remove the centre
drip tray.
7 Press the DESCALE button, then press the
centre dial to start the descale cycle.
89
ninjakitchen.eu
88 ninjakitchen.eu