Текст страницы
release Eutton 2 and the coffee release Eutton 4
to stop the Àow of water
GB
Upon ¿rst use or after a long period of inactivity, this
process can reTuire several minutes For suEseTuent
coffees, this will no longer Ee necessary
Making coffee
Press the ON OFF Eutton 3 to switch the device
on (Fig &
this case, switch the machine off, wait a few minutes
and turn the ¿lter holder 10 very slowly, Eecause
this may lead to residual pressure and a spraying
of water
Wait 10 seconds after pouring the coffee Eefore
you remove the ¿lter holder 10
To remove the ¿lter holder 10 , turn it slowly from
right to left to avoid spraying water or coffee
Note: When removing the ¿lter holder 10 the coffee
pad may stay attached to the upper part of the
device To remove the coffee pad, turn the ¿lter
holder 10 as shown in Fig . and let the coffee
pad fall into the ¿lter holder 10
With ground coffee:
Place the individual nozzle disc 11 , the silicone
perforated disc 12 and, for powdered coffee, the
¿lter for 2 cups 13 or 1 cup 14 in the ¿lter holder
Stand-by Function:
When the device is switched on Eut no function is Ee-
ing performed, it will automatically switch itself off after
30 minutes The appliance is now in stand-Ey mode
Press the ON OFF Eutton 3 to switch the device on
again
Filling the water tank during use
10 (Fig E
0easure out the coffee in the ¿lter and lightly press
it together with the coffee grinder 15 provided for
two coffees ¿ll two measuring cups, for Must one
coffee, ¿ll one measuring cup
Note: If you put too much coffee powder in the
¿lter 13 , the ¿lter holder 10 may Ee dif¿cult to
screw on and or coffee may leaN from the ¿lter 13
Note: The water tanN 18 should Ee ¿lled Eefore it
Eecomes completely empty
With pads:
Press the ON OFF Eutton 3 to switch the device
off (Fig &
Pull the power plug 6 from the socNet
Remove the water tanN 18 and ¿ll it with fresh, still
water (Fig A up to the ³0A;³ marN
Put the water tanN 18 EacN in place (Fig B
Note: 0aNe sure that the water tanN 18 has
Eeen replaced correctly Otherwise it may ElocN
the Àow of the coffee
Insert the mains plug 6 into a standard house-
hold socNet
Press the ON OFF Eutton 3 to switch the
device on
If the water tanN 18 is emptied completely, air may
get into the circuit and ElocN the Àow of coffee To
ensure that the device can Ee used again, switch
it off and let it cool down
Place a container under the ¿lter holder area and
switch on the device Ey pressing the ON OFF
Eutton 3
Press the coffee release Eutton 4 and let at least
one cup of water Àow from the ¿lter holder collector
to restore the device
Insert the ¿lter for the pads 14 in the ¿lter holder 10
(see Fig G
Press the coffee pad with you ¿ngers in the ¿lter 14
underneath The coffee pad must Ee e[actly in the
middle and inside the ¿lter 14
Secure the ¿lter holder 10 Ey turning the ¿lter
holder handle from right to left 0aNe sure that the
¿lter holder 10 is hooNed on properly (Fig +
Place the cup under the ¿lter holder discharge 10
When the relevant Eutton 4 lights up, the machine
is ready to release coffee Press the coffee release
Eutton 4
Press the coffee release Eutton 4 again to stop
the Àow of coffee
Note: If the coffee pad is not correctly inserted into
the ¿lter 14 or not secured properly Ey the ¿lter
holder 10 , drops of water may leaN from the ¿lter
holder 10
Note: Do not remove the ¿lter holder 10 while
coffee is still pouring Otherwise there is a risN of
scalding
Note: If water does not Àow from the ¿lter holder 10 ,
this could Ee a result of a clogged ¿lter 13 , 14 In
18
1363_Espressomaschine_Content_IT_GB_FR_DE_ES_PT_NL_GR_RU_AE.indd 18
07.08.15 09:12