Текст страницы
Version 1.0
4.
Enter your user name and password (both are admin by default) and click Login.
----End
Tip
If the above page does not appear, try the following solutions:
−
Clear the cache of the web browser or try another web browser.
−
Check whether another device with the IP address 10.16.16.168 exists in the local network.
−
If the problem persists, reset the switch and try again. Reset method: When the SYS LED indicator is
blinking, press down the reset button (RESET) using a sharp item (such as a pin) for about 7 seconds,
and then release it when all LED indicators are solid on. When the SYS LED indicator blinks again, the
switch is reset successfully.
After logging in to the web UI, you can start to configure the switch.
Chapter 1 Web login 2