Текст страницы
Indicateurs LED
Français
- Installing the switch
- Connecting your devices
LED indicators
English
Specifications
LED indicator
Status
Description
Indicateur LED Statut
Description
Power
Standards
IEEE 802.3, IEEE 802.3u,
IEEE 802.3x, IEEE 802.3ab
Solid on The switch is connected to a
Le dispositif est branché
correctement à l'alimentation.
Solide en
marche
power resource properly.
Select one mounting method as required.
Option A. Desktop mounting
Put the switch on a stable and flat desktop.
Internet
10/100/1000
Mbps RJ45 Port
Eteint
Off
Le commutateur est déconnecté de la
source d’alimentation ou n’est pas
connecté à une source d’alimentation.
Switching
capacity
16 Gbps
The switch is disconnected or not
properly connected to a power
resource.
Solid on
The port is connected properly.
Store-and-forward
Supported
Solide en
marche
Le port est correctement connecté.
Switch
Clignotant Les données sont transmises à travers
1-8
1-8
Option B. Wall mounting
Step 1: Drill two holes in the wall in a horizontal distance of 116 mm.
Knock sleeve anchors (self-preparation) into the holes using a rubber
hammer till the sleeve anchor is level with the wall. Then tighten two
screws (self-preparation) into the sleeve anchors using a screwdriver,
and keep the screw heads outside the wall at least 2.7 mm, to ensure
that the switch can be hung on the screws firmly.
Blinking
Data is being transmitted over the
port.
le port.
Auto learning &
auto aging
Supported
Quick Installation Guide
Router
MAC address table
4 K
2.7mm
Eteint
Le port est déconnecté ou n’est pas
correctement connecté.
Off
The port is disconnected or
improperly connected.
8-Port Gigabit Ethernet Switch
TEG1008M
LAN1
LAN2
LAN3
LAN4
WAN
Dimension
140.2 mm * 66.2 mm * 25.2 mm
116mm
Sleeve anchor
LAN port
WAN port
Power supply
Input: 100-240 V AC, 50/60 Hz, 0.3 A
Output: 9 V DC, 0.6 A
LED-Anzeige
Deutsch
Indicadores LED
Español
Indicador LED
Estado
Descripción
LED-Anzeige
Status
Beschreibung
Operating
environment
Temperature: (0 - 40) °C
Humidity: (10 - 90) % RH, non-condensing
Screw
Leuchtet Das Gerät ist korrekt an eine
Encendido
Stromversorgung angeschlossen.
Storage
environment
Temperature: (-40 - 70) °C
Humidity: (5 - 90) % RH, non-condensing
El dispositivo está conectado a la
fuente de alimentación
correctamente.
Step 2: Align the slots of the switch to the screw heads, and slip the
switch to make it fixed on the screws firmly.
Aus
Apagado
Der Switch ist von der
Stromversorgung getrennt oder nicht
ordnungsgemäß angeschlossen.
El switch está desconectado o no
correctamente conectado a una
fuente de alimentación.
Transmission
rate
Computer
IP camera
Printer
Package contents
Leuchtet
Der Port ist korrekt verbunden.
Encendido El puerto está conectado
Ethernet: 10 Mbps (half duplex) / 20 Mbps
(full duplex)
Fast Ethernet: 100 Mbps (half duplex) /
200 Mbps (full duplex)
Gigabit Ethernet: 2000 Mbps (full duplex)
correctamente.
Parpadeo Se están transmitiendo datos sobre el
Blinkt
Die Daten werden über den Port
übertragen.
1-8
1
2
3
4
5
6
7
8
1-8
· Switch * 1
· Power adapter * 1
· Quick installation guide * 1
puerto.
Transmission
media
Tip:
All ports of your switch support the auto MDI/MDIX function, indicating that either straight cable or crossover cable is acceptable
to connect your switch to Ethernet devices.
Apagado El puerto está desconectado o mal
Aus
Der Port ist nicht verbunden oder
falsch angeschlossen.
Ethernet: CAT3 UTP/STP cable or better
Fast Ethernet: CAT5 UTP/STP cable or better
Gigabit Ethernet: CAT5e or CAT6 UTP/STP
cable (recommended)
conectado.
If any item is missing, damaged or incorrect, please keep the
original packaging and contact the local reseller or distributor
immediately.
Note: For safety, do not face the air vents of the switch down.
LED-jelzők
Magyar
Indicadores LED
Português
Светодиодныеиндикаторы
Русский
Kontrolki LED
Polski
Indicador LED
Estado
Descrição
LED visszajelző
Státusz
Leírás
Kontrolka LED
Stan
Opis
Светодиодный
индикатор
Статус
Описание
Ciągłe
światło
Folyamatosan
bekapcsolva
Urządzenie jest prawidłowo
podłączone do źródła zasilania.
Sólido
ativado
O dispositivo está ligado à fonte de
alimentação adequada.
A készülék helyesen van az
energiaellátáshoz csatlakoztatva.
Коммутаторподключенк
источникупитания.
Горит
постоянно
CE Mark Warning
This is a Class B product. In a domestic environment, this product
may cause radio interference, in which case the user may be
required to take adequate measures.
The mains plug is used as disconnect device; the disconnect device
shall remain readily operable.
Wyłączone
Негорит
kikapcsolva
Off
(Desligado)
Copyright
Copyright © 2019 Shenzhen Tenda Technology Co., Ltd. All rights
reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda
Technology Co., Ltd. Other brand and product names mentioned
herein are trademarks or registered trademarks of their respective
holders. Specifications are subject to change without notice.
Urządzenie jest odłączone od źródła
zasilania lub nie zostało do niego
poprawnie podłączone.
Коммутаторотключенот
источникапитанияили
подключенкнемунеправильно.
O interruptor é desligado da fonte de
alimentação ou não é conectado a
uma fonte de alimentação.
A váltó nincs, vagy nem
megfelelően van csatlakoztatva a
tápegységhez.
Портподключенправильно.
Folyamatosan
bekapcsolva
Горит
постоянно
Ciągłe
światło
Gniazdo jest połączone poprawnie.
Az egyező port helyesen van
csatlakoztatva.
Sólido
ativado
A porta está ligada corretamente.
Technical Support
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. (2) To avoid unnecessary radiation interference, it is
recommended to use a shielded RJ45 cable.
Miganie
Port obsługuje przesyłanie danych.
1-8
1-8
1-8
1-8
Мигает
Черезпортосуществляется
передачаданных.
Villog
Adatátvitel van folyamatban a
porton keresztül.
A piscar
Os dados estão a ser transmitidos
pela porta.
Негорит Портнеподключенилиподключн
kikapcsolva A port nincs, vagy nem
Wyłączone Port jest odłączony lub niepoprawnie
неправильно.
megfelelően van csatlakoztatva.
podłączony.
A porta está desconectada ou
indevidamente conectada.
Off
(Desligado)
Caution:
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan
District, Shenzhen, China. 518052
USA hotline: 1-800-570-5892
Canada hotline: 1-888-998-8966
Hong Kong hotline: 00852-81931998
Website: http://www.tendacn.com
E-mail: support@tenda.com.cn
LED индикатори
Български
Indicatoare LED
Română
Indicatori LED
Italiano
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for
help.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
LED индикатор
Статус
Описание
Indicatore LED Stato
Descrizione
Indicator LED
Stare
Descriere
Adapter Model: BN049-A05009E/BN049-A05009B
Manufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
Input: 100 - 240 V AC 50/60 Hz, 0.3 A
Output: 9 V 0.6 A
: DC Voltage
Producto
NOMBRE DEL PRODUCTO: Switch Gigabit de 8 puertos
MODELO: TEG1008M
Accensione
fissa
Il dispositivo è collegato alla rete
elettrica correttamente.
Без
прекъсване
Dispozitivul este conectat corect la
sursa de alimentare.
Rămâne
aprins
Превключвателятесвързан
правилноселектрозахранването.
Alimentador de Energía:
Alimentación: 100-240 V ca 50/60 Hz, 0.3 A
Salida: 9 V cc 0.6 A
Caution!
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Spento
Oprit
Изключен
(Off)
RECYCLING
Суичътеизключенот
захранванетоилинееправилно
включенкъмзахранването.
Switch-ul este deconectat de la sursa
de alimentare sau nu este conectat
corect la sursa de alimentare.
PAIS DE ORIGEN: CHINA
L'interruttore è scollegato
dall'alimentazione o non
correttamente collegato a una presa
di corrente.
Rămâne
aprins
Portul corespunzător este conectat
corect.
Без
прекъсване Портътесвързанправилно.
Accensione
fissa
La porta è collegata correttamente.
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. (2) To avoid unnecessary radiation interference, it is
recommended to use a shielded RJ45 cable.
Мигащ
Даннитесепредаватпрезпорта.
1-8
1-8
1-8
Lumineaza
intermitent Datele sunt transmise prin port.
Accensione
intermittente
I dati vengono trasmessi attraverso
la porta.
Портътепрекъснатили
неправилносвързан.
Изключен
(Off)
Spento
La porta è scollegata o collegata in
modo non corretto.
Oprit
Portul este deconectat sau nu este
conectat corect.
This product bears the selective sorting symbol for Waste electrical
and electronic equipment (WEEE). This means that this product must
be handled pursuant to European directive 2012/19/EU in order to
be recycled or dismantled to minimize its impact on the
environment.
User has the choice to give his product to a competent recycling
organization or to the retailer when he buys a new electrical or
electronic equipment.
LA OPERACIóN DE ESTE DISPOSITIVO ESTA SUJETA A LAS
SIGUIENTES CONDICIONES:
a) Es posible que este equipo o dispositivo no cause
interferencia perjudicial.
b) Este equipo o dispositivo debe aceptar cualquier tipo de
interferencia, incluyendo la que pueda causar su operación no
deseada.