Текст страницы
Connection
1. Connect to RJ45 port.
Connect the switch to the RJ45 port of the peer network device by using an
Ethernet cable. The uplink port is connected to a LAN port of the router or NVR,
and the downlink port is connected to such devices as computer, AP and
security camera.
2. Connect to SFP or SFP+ port (if any).
Insert the SFP (or SFP+) optical module (self-prepared) into the SFP (or SFP+)
port of the switch, then insert one end of the optical fiber into the SFP (or SFP+)
optical module, and connect the other end to the peer device.
3. Power on the device.
- Connect the switch to a power outlet with the included power cord or power
adapter (if any).
- If the switch supports PoE power supply, you can connect its PoE port to a
PoE IN power supply device that meets the switch power receiving standard
with an Ethernet cable.
Login
If there is a management IP address on the label of the switch, you can perform
the following steps to enter the web UI of the switch, and configure the switch.
1. Connect the computer to an RJ45 port of the switch using an Ethernet cable.
2. Set the IP address of Ethernet (or Local Area Connection) of the computer to
the same network segment of the switch's IP address. For example, if the IP
address of the switch is 10.16.16.168, the IP address of the computer can be
set to 10.16.16.X (X is 2-254, and is not occupied by other devices), and the
subnet mask is 255.255.255.0.
3. Launch a web browser, input the management IP address of the switch in the
address bar, and enter the web login page of the switch.
After successfully logging in to the web UI of the switch, you can configure the
switch.
Get support and services
For technical specifications, user guides and more information, please visit the
product page or service page on www.tendacn.com. Multiple languages are
available.
You can see the product name and model on the product label.
https://www.tendacn.com/service/default.html
- 3 -