Текст страницы
ENG
Filter Element Replacement
- Open the filtered water spigot.
- Open the valve at the inlet to the
water filter.
Ball
valve
- After the water filter fills with water and
water comes out of the spigot, close the
spigot tap.
- Ensure there are no leaks, and if
needed, tighten the connections and
ensure the plastic tubes are properly
installed in the fittings.
Ball
valve
- Turn on the filtered water spigot.
- Set the optimum water flow by adjusting
the ball valve in accordance with the
technical characteristics of the water
filter.
- Flush the system with 10 litres of water
to rinse the filter elements.
10 l
Attention!
Filter elements should be replaced regularly, at least once a year.
In case, when the water with high levels of mechanical impurities enters the water filter,
the first-stage filter element should be changed if the flow rate of filtered water falls below
optimum levels.
The recommended replacement frequency for the «BARRIER EXPERT» Softening filter
element depends on the pre-filtration water hardness.
Pre-filtration water hardness, (mg-equiv/L)
5
7
10
Average daily
drinking water
consumption,(l)
Replacement frequency
5
2 months
1,5 months
1 month
10
1 month
3 weeks
2 weeks
22