Текст страницы
INSTALLATION GUIDE
VERSION 1.1
OPTIONAL UPGRADE
INSTRUCTIONS
VERTICAL GPU BRACKET (PH-VGPUKT4.0_03)
The G360A chassis supports the Phanteks Vertical GPU Bracket.
The Vertical GPU Bracket supports 3 and 4 slot GPU’s with access
to the GPU connectors on slot 1 and 2.
Thank you for choosing Phanteks. Please take a moment to
carefully go through the manual. This manual will walk you
through all of the features the Eclipse G360A has to offer and
installation steps to build a full system.
It can be easily installed in the PCI slot area. Follow the instructions
that are included with the Vertical GPU bracket.
This manual is intended for:
Eclipse G360A
Phanteks will not take responsibility for any damages incurred due to incorrect
installation or usage of this product.
INCLUDED ACCESSORIES
RECOMMENDED COOLING CONFIGURATION
FRONT I/O
The Eclipse G360A chassis allows for multiple different cooling
configuration. These are four examples to maximize the G360A’s
cooling potential.
AUDIO/MIC
PSU SCREW
4x
SSD + MOTHERBOARD
SCREW
22x
MOTHERBOARD
STAND-OFF
1x
USB 3.0
360 FRONT AIO COOLER
360 TOP AIO COOLER
Fans can be placed on the front of the chassis behind the front panel.
RAM Height Clearance | 42 mm
COLOR BUTTON
AIO 360
120MM
120MM
120MM
MODE BUTTON
120MM
120MM
120MM
ZIP TIE
6x
HDD LOCKING SCREW
2x
120MM
120MM
POWER BUTTON
120MM
120MM
D-RGB 120MM FAN
3x pre-installed
2.5” SSD BRACKET
2x pre-installed
120MM
120MM
FAN & RADIATOR SUPPORT
D-RGB CONTROLS
FANS
FRONT
TOP
REAR
3x
3x
1x
120mm
MODES
COLORS
2x
2x
-
140mm
SOLID
280 FRONT AIO COOLER
4X 140 MM FANS TOP & FRONT
RADIATOR
Fans can be placed on the front of the chassis behind the front panel.
Maximum number of 140 mm fans
BREATHING
up to 360*
*
up to 360
up to 120
120mm
140MM
140MM
140MM
140MM
up to 280
-
-
140mm
SPARKLE
It is not possible to install a 360 radiator in the front and top simultaneously
*
MUTLI-COLOR
140MM
CLEARANCE
140MM
120MM
120MM
120MM
120MM
TURN OFF LEDs
Press and hold the MODE button for two seconds to turn
off LEDs, press again to turn it ON
AIO 360
AIO 280
NOTE | D-RGB control buttons are deactivated if connected to a motherboard.
140MM
PRO TIP
140MM
162 mm
42 mm when using top radiator
400 mm
220 / 280 mm
280 mm width
122x398x65 mm
142x330 mm
122x398 mm
CPU cooler height
RAM height
GPU length
Power Supply
E-ATX
Front 360 radiator
Front 280 radiator
Top 360 Radiator
For a more vibrant D-RGB light
effect, place the fans directly
under the front panel
INSTALLATION GUIDE
04
| www.phanteks.com
| www.phanteks.com
01