Текст страницы
INSTALLATION GUIDE
VERSION 1.1
STORAGE | 2.5” SSD
PANEL REMOVAL
Before starting the installation process, we recommend to
remove all external panels. Follow these steps below.
LEFT SIDE PANEL
RIGHT SIDE PANEL
INSTALL
4x
SSD SCREW
SLIDE UP TO
REMOVE
SLIDE DOWN TO
INSTALL
Slide the SSD Bracket up to remove it from the chassis.
Secure the SSD with 4x SSD screws to the SSD Bracket.
LOOSEN
LOOSEN
STORAGE | 3.5” HDD
2x
THUMBSCREW
2x
THUMBSCREW
PRO TIP
The HDD tray can also hold
a 2.5” SSD
Loosen the 2 captive thumb screws and slide to remove the
tempered glass side panel.
Loosen the 2 captive thumb screws and slide to remove the right
side panel.
FRONT PANEL & DUST FILTERS
FRONT FAN BRACKETS
120MM FANS
140MM FANS
TOP FILTER
Slide the 3.5” HDD trays out of the HDD cage.
Open the side clips, place the HDD and close the clips to secure
the HDD in place.
SK D-RGB FAN 120MM
PSU FILTER
REMOVE
REMOVE
CASE SCREW
3x
6x
CASE SCREW
Remove front panel by pulling the panel from below.
Remove the front brackets for
easier installation of the front fans
or radiator.
For 140 mm fans
remove only the
left bracket.
220mm
65mm
280mm
HARDWARE INSTALLATION
To move (or remove) the HDD Bracket to a different position,
remove 8x screws located at the bottom and the PSU cover.
The HDD cage has 2 possible positions to allow for a front 360
radiator or for additional PSU clearance
MOTHERBOARD
POWERSUPPLY
CABLES
Connect the front I/O cables to the motherboard and power
supply.
More D-RGB lighting products can be connected to the integrated
D-RGB controller. Optionally, lighting can be connected and
controlled via motherboard software.
MOTHERBOARD FRONT I/O
EXPAND WITH MORE D-RGB PRODUCTS
SYNC LIGHTING TO THE MOTHERBOARD
INSTALL
INSTALL
PSU
9x
4x
PSU SCREW
MOTHERBOARD
SCREWS
Install the power supply with 4x PSU screws.
Motherboard header
Install the ATX motherboard using 9x motherboard screws. For
M-ATX Motherboards follow the motherboard instructions to
move the stand-offs to the correct position.
| www.phanteks.com
| www.phanteks.com
INSTALLATION GUIDE
INSTALLATION GUIDE
03
02