Текст страницы
en
Cleaning and servicing
Warning!
Prevent the cut ingredients from building up
in the outlet opening.
Tip: To ensure even cutting results, process
thin ingredients in bunches.
■Add ingredients.
Maximum amount of liquid = 1.25 litres;
maximum amount of frothing or hot
liquids = 0.5 litres;
Optimal processing capacity –
solids = 50100 g;
■Attach the cover and turn anticlockwise
all the way into the blender handle. The
cover must be locked in position.
■Set the rotary switch to the desired
setting.
Note: If the food to be processed sticks in
the continuousfeed shredder, switch food
processor off, pull out mains plug, wait until
the drive comes to a standstill, remove
cover from the continuousfeed shredder
and empty feed tube.
Adding more ingredients
Fig. J-8:
■Switch off the appliance with the rotary
switch.
■Remove the lid and add ingredients
or
■remove the funnel and gradually add solid
ingredients through the refill opening
or
■pour liquid ingredients through the funnel.
After using the appliance
■Switch off the appliance with the rotary
switch.
■Rotate the continuousfeed shredder in
an anticlockwise direction and remove.
■Rotate the lid in an anticlockwise direc
tion and remove.
■Remove disc holder with disc. To do this,
press finger from below against the drive
shaft (Fig. H).
■Clean parts.
Blender
After using the appliance
■Switch off the appliance with the rotary
switch.
■Rotate the blender in a clockwise
direction and remove.
Tip: It is recommended to clean the blender
immediately after use.
W Risk of injury from sharp blades /
rotating drive!
Never place fingers in the attached blender!
Do not remove / attach the blender until the
drive is at a standstill! Operate the assem
bled blender only and with the lid attached.
Cleaning and servicing
The attachments and accessories used
must be thoroughly cleaned after each use.
W Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid. Add a
max. 0,5 litres of hot or frothing liquid.
Attention!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit
Warning!
Blender may be damaged. Do not process
deepfrozen ingredients (except ice cubes).
Do not operate blender when empty.
W Danger of electric shock!
Never immerse the base unit in water or
place under running water. Do not use a
steam cleaner.
■Remove mains plug.
■Wipe the base unit and drive cover with
a damp cloth. If required, use a little
detergent.
■Then dry the base unit.
Working with the blender
Fig. J:
■Press the release button and
move the swivel arm to
position 4.
■Remove the blender drive cover.
■Attach blender jug (mark on the handle
on mark on the base unit) and turn all the
way in an anticlockwise direction.
24