Текст страницы
Hints and Tips
O For best results store and juice the
fruit at room temperature and hand
roll on a worktop before juicing.
O To help with juice extraction move
the fruit from side to side when
juicing.
2
Put the food into the feed tube.
3
Switch on and push down evenly
with the pusher - never put your
fingers in the feed tube.
To use the small feed tube - put the
large pusher inside the feed tube first.
To use the large feed tube - use both
pushers together.
O
Do not let the bowl fill up as far as
the cutting disc: empty it regularly.
O When juicing large quantities,
empty the sieve regularly to
prevent the build up of pulp and
seeds.
O
Do not exceed the ‘MAX’ capacity
level on the bowl.
Hints and Tips
O When using the reversible discs
ensure that the required cutting side
is uppermost.
O Use fresh ingredients.
O Do not cut food up too small. To
stop food slipping over during
processing fill the width of the large
feed tube or use the small feed tube.
19 Food Mincer
a
Ring nut
b
Screens: medium or coarse
(depends on model variant)
c
Cutter
d
Scroll
e
Body
f
Tray
g
Pusher
O When slicing or grating: food placed
upright comes out shorter than food
placed horizontally.
O After use there will always be a
small amount of waste on the disc
or in with the food.
18 Citrus Juicer
a
Cone
b
Sieve
Note: This attachment can only be used
in conjunction with the food processor
AT284.
Assemble the Citrus Juicer as shown in
illustration 18
1
Fit the sieve into the bowl ensuring
that the tab on the rim locks into the
bowl handle.
2
Fit the cone over the drive shaft
turning until it drops all the way down.
3
Cut the fruit in half. Switch to
speed 3 and press the fruit onto the
cone.
Assemble the Food Mincer as shown in
illustration 19
1
Fit the scroll inside the body.
2 Fit the cutter – ensure it is located
correctly with the cutting side
outermost.
3
Fit a screen – align the pin with the
notch.
4
Loosely fit the ring nut.
To use the Food Mincer
1
Raise the mixer head. Ensure both
outlet covers are fitted.
2 With the attachment in the position
shown - align the drive tabs on
the end of the scroll with the
corresponding slots in the drive
outlet.
3 Push the attachment into the outlet
and turn clockwise until it locks into
place.
4 Tighten the ring nut manually.
5 Fit the tray
6 Cut meat into 2.5cm (1”) -wide strips.
7
Select Max speed. Using the pusher
gently push the food through, one
piece at a time. Do not push hard -
you could damage your machine.
11